TRX250R.ORG
Classifieds => For Sale => For Sale - Parts => Topic started by: Powderillusions on April 03, 2014, 11:41:47 AM
-
---
-
Not to tell you how to sell your items but $280 is a little high considering they are only $299 brand new
-
---
-
---
-
---
-
Pm sent
-
---
-
Good price nice deal
-
the water pump bearing feels like its got crap in it you can clean it oil it and use it or replace it, im not trying to hide a possible issue (or not) so leaving that up to the buyer to decide
In the chat box you were saying you already tried cleaning it.
"Hey I oiled that pump bearing blew it out cleaned it and re oiled it---it feels like its got either something in it or a flat ball---dont see how it could have a flat ball but anything is possible I guess --"
But in the add you said the buyer needs to clean it. Sounds more like the bearing is trash. These covers were a little questionable when they came out for $199. Some of the water pump bore holes were on the tight side not allowing the bearing to be push in straight. Causing the bearing to not spin freely. Just a heads up to Josh or who ever buys this cover
-
My bearing was the same way...I bought when it was $199. I cleaned it and lubed it and it felt just like it did before so I ran it to see what would happen. So far it's been holding up the past few race seasons BUT I should have pulled it and checked the bearing to make sure.
-
In the chat box you were saying you already tried cleaning it.
"Hey I oiled that pump bearing blew it out cleaned it and re oiled it---it feels like its got either something in it or a flat ball---dont see how it could have a flat ball but anything is possible I guess --"
But in the add you said the buyer needs to clean it. Sounds more like the bearing is trash. These covers were a little questionable when they came out for $199. Some of the water pump bore holes were on the tight side not allowing the bearing to be push in straight. Causing the bearing to not spin freely. Just a heads up to Josh or who ever buys this cover
Tony what did you do to remedy this?
-
But in the add you said the buyer needs to clean it.
So what tony, I decided to clean the bearing to see what was up with it before I sold it to josh who I was talking to in the chat room and in PM's about the the bearing and who I copied and pasted the entire chat convo TO him VIA PM just to make sure he got it since he didnt replay back before I was headed off site --This is all before he has sent me a dime I just wanted to 100% make sure he knew what I found BEFORE he bought it--
-
So what tony, I decided to clean the bearing to see what was up with it before I sold it to josh who I was talking to in the chat room and in PM's about the the bearing and who I copied and pasted the entire chat convo TO him VIA PM just to make sure he got it since he didnt replay back before I was headed off site --This is all before he has sent me a dime I just wanted to 100% make sure he knew what I found BEFORE he bought it--
Solid seller right here! Honesty pays and im sure Josh appreciates that in return, as i know he himself is a great seller
-
Also tony if your gonna quote me why dont you quote every word I typed instead of trying to make me look like a crappy seller--and I quote myself--
New [10-04, 01:25] Powderillusions: yes sir
New [10-04, 01:17] Hawaiiysr: water pump bearing your talking about. correct?
New [09-04, 23:20] Powderillusions: want you to check it good--recheck it and replace it before you put it on the bike--
New [09-04, 23:18] Powderillusions: Hey I oiled that pump bearing blew it out cleaned it and re oiled it---it feels like its got either something in it or a flat ball---dont see how it could have a flat ball but anything is possible I guess --
-
Tony what did you do to remedy this?
Make sure you heat to 200 degrees and remove the bearing. Check to see if the bore is scarred. Seems like it did not push in all the way on mine but the bearing spun without a flat spot. But ESR covers are not OEM. When you buy a ESR cover from Eddy you get a warranty. When you buy second hand you get what you got. Check the bearing, lol, for a flat spot when removed. You can only remedy after you find out what is wrong. If I was Powder, I would not sell something that is messed up to a member.
-
Tony, people sell broken things on here all day long. As long as it is disclaimered, what is the issue? Not everyone has the machinery or the funds to have things repaired, so why not sell at a cheap price to those who can? Me personally i'd rather sell a part that i cant fix, to someone who can, and keep their bike movin.
Just my .02
-
Also tony if your gonna quote me why dont you quote every word I typed instead of trying to make me look like a crappy seller--and I quote myself--
New [10-04, 01:25] Powderillusions: yes sir
New [10-04, 01:17] Hawaiiysr: water pump bearing your talking about. correct?
New [09-04, 23:20] Powderillusions: want you to check it good--recheck it and replace it before you put it on the bike--
New [09-04, 23:18] Powderillusions: Hey I oiled that pump bearing blew it out cleaned it and re oiled it---it feels like its got either something in it or a flat ball---dont see how it could have a flat ball but anything is possible I guess --
Thanks for posting after the sale. So why don't you spend 5 minutes and take the bearing out to see what you are actually talking about. Or do you just sell the problem to someone else?
-
Technically it came from ESR like that NEW as a lot did, so is it bad??? I'm still running mine and I LOVE the cover. Worked well and saved my ass at the track when I had to swap out a clutch. Enjoy your new cover Hawaii!
-
Technically it came from ESR like that NEW as a lot did
Mine came in parts not assembled. Does a bearing that does not spin freely qualify as bad. I would say yes. You could have called ESR to ask any questions. This comes from an unknown source. I would not install it on by bike. Yes, I have one on my bike for 3 years now and the bearing spun freely before putting on the WP.
-
Nothing was hidden or falsely advertised to the buyer. I see zero problem with this sale. But we all know how much you love to start drama pumashine.
-
Not a problem--I made some calls today ---sorry to say I WILL not be selling the cover to josh- you have tony to thank for that--there is zero reason to put up with this kind of crap especially from a "moderator"
Thanks for posting after the sale. So why don't you spend 5 minutes and take the bearing out to see what you are actually talking about. Or do you just sell the problem to someone else?
Notice I just told you in the chat room to get your facts together before butting into business thats not yours---well josh offered me 150 the other day as a down payment till friday I did not accept that payment, said just pay friday---BEFORE I boxed anything I checked the bearing out on my own and reported what I found to josh via chat (thats as open and public as shit gets) THEN a copy/paste of that chat log straight to him to make sure he got it---so NO cash has been exchanged nor did it---- its really NON of your business and I REALLY shouldnt have to feel like i had to bring my business public maybe--ahh never mind youve shown your colors plenty right here in this thread
-
Not a problem--I made some calls today ---sorry to say I WILL not be selling the cover to josh- you have tony to thank for that--there is zero reason to put up with this kind of crap especially from a "moderator"
Notice I just told you in the chat room to get your facts together before butting into business thats not yours---well josh offered me 150 the other day as a down payment till friday I did not accept that payment, said just pay friday---BEFORE I boxed anything I checked the bearing out on my own and reported what I found to josh via chat (thats as open and public as shit gets) THEN a copy/paste of that chat log straight to him to make sure he got it---so NO cash has been exchanged nor did it---- its really NON of your business and I REALLY shouldnt have to feel like i had to bring my business public maybe--ahh never mind youve shown your colors plenty right here in this thread
For some reason you think that your shit don't stink. You made some phone calls and feel that its not important enough to share with the rest of the forum. For some reason you think you can make a deal with a member here and cancel that deal because you feel I mistreated you. Wake up buddy. Obviously I had to jump up and down to make you do what you should have done before you even started this sale.
-
HEY HEY look tony opened a closed thread to make a post to start more shit----keep up the good work mr moderator
-
HEY HEY look tony opened a closed thread to make a post to start more shit----keep up the good work mr moderator
Thats ok if you can't respond in reality you will be banned for for life. I am done with your crap!
-
with my crap lmao really----