TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: max-pec on April 11, 2014, 07:06:02 PM

Title: Does somebody own PRP or TRC A-Arms here?
Post by: max-pec on April 11, 2014, 07:06:02 PM

Thanks, Max.

Title: Does somebody own PRP or TRC A-Arms here?
Post by: Hawaiiysr on April 12, 2014, 04:21:55 AM

I have heard of PRP but not of TRC. I googled them. didn't find any 250R pictures but 400EX had a few.
http://www.tigorracing.com/honda400ex.htm
look a lot like Burgard arms.

Title: Does somebody own PRP or TRC A-Arms here?
Post by: max-pec on April 15, 2014, 11:46:47 PM

Mines are from a 250r geometry made to accept the ktm sx450 engine, not it is back with 250r engine mounts and still be a 250r geometry, a-arms and swing arm. Linkage of a crf450 2004 instead of 1991 cr500 linkage like most of others 250r aftermarket geometry. I had some problems finding parts for all my stuff, prp are close, a guy who was building with them or for them is now the one to get new parts for those build, but he is to busy to proceed an orther even if he have all the parts.

Title: Does somebody own PRP or TRC A-Arms here?
Post by: max-pec on April 15, 2014, 11:52:06 PM

I wrote this post because I had some difficult to find lower balljoints, I did removed them 3 days ago and did sent them to my local builder, it's wrote COM 12 and I believe they are from Frap. Found something that was looking like it, but my builder will do the rest. Also I have been able to find a bushing set at atvbushings.com with a vernier, pictures and multiple e-mail. They were alsmost perfect, but I needed to add a finger polish nail coat inside my a-arms to get them enough tight.

Title: Does somebody own PRP or TRC A-Arms here?
Post by: max-pec on April 16, 2014, 12:02:51 AM

(http://forums.trx250r.org/vbulletin_imports/662_1616_2017-04-18_2689.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1617_2017-04-18_2837.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1618_2017-04-18_238.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1619_2017-04-18_6053.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1620_2017-04-18_7010.jpg)

Title: Does somebody own PRP or TRC A-Arms here?
Post by: max-pec on April 16, 2014, 12:11:21 AM

At the end of last summer.(http://forums.trx250r.org/vbulletin_imports/662_1621_2017-04-18_7151.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1622_2017-04-18_4428.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1623_2017-04-18_7463.jpg)

Title: Does somebody own PRP or TRC A-Arms here?
Post by: max-pec on April 16, 2014, 12:13:00 AM

(http://forums.trx250r.org/vbulletin_imports/662_1624_2017-04-18_5082.jpg)Will get pictures of the frame and subframe as they are now.

Title: Does somebody own PRP or TRC A-Arms here?
Post by: max-pec on April 16, 2014, 12:29:08 AM

(http://forums.trx250r.org/vbulletin_imports/662_1625_2017-04-18_9849.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1626_2017-04-18_2596.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1627_2017-04-18_8188.jpg)

Title: Does somebody own PRP or TRC A-Arms here?
Post by: max-pec on April 16, 2014, 12:35:29 AM

Engine before.(http://forums.trx250r.org/vbulletin_imports/662_1628_2017-04-18_7365.jpg)The centercases are here, but side cases aren't mine.(http://forums.trx250r.org/vbulletin_imports/662_1629_2017-04-18_451.jpg)This is the new parts.(http://forums.trx250r.org/vbulletin_imports/662_1630_2017-04-18_5286.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1631_2017-04-18_2610.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1632_2017-04-18_2846.jpg)(http://forums.trx250r.org/vbulletin_imports/662_1633_2017-04-18_5369.jpg)