TRX250R.ORG

Workshop => Carburetor, Intake, and Exhaust => Topic started by: muthahucker on April 15, 2014, 12:11:44 PM

Title: Air box lids
Post by: muthahucker on April 15, 2014, 12:11:44 PM

Does anyone still make the aftermarket airbox lids for both the ATC and TRX that will let you run a K&N prefilter on the top lid?
Thanks

Title: Air box lids
Post by: ytman on April 16, 2014, 06:30:23 AM

EHS Racing may be what you're thinking of. Kind of a lot of dough tho.

Title: Air box lids
Post by: sameltoe on April 16, 2014, 10:09:40 AM

Pumashine has made a few of the rings, but you need to buy the outerwares material...

Title: Air box lids
Post by: Pumashine on April 16, 2014, 10:26:02 AM

Quote from: sameltoe;31647

Pumashine has made a few of the rings, but you need to buy the outerwares material...

I have one kit left for the ATC.

Title: Air box lids
Post by: Onski326 on April 16, 2014, 10:53:06 AM

I just cut the middle out of mine and am using a section of one of those reusable Heat/AC filters that are washable. Works super! Been using them for years. Never smoked a motor yet.

Title: Air box lids
Post by: The_Steve_Man on April 16, 2014, 12:17:55 PM

Cut the middle out and put panty hose around it.  :)
Not the best looking but it does work

Title: Air box lids
Post by: Pumashine on April 16, 2014, 02:27:18 PM

I made up some kits. Ring, nuts and bolts so you could cut a hole in the lid, drill through the existing holes in the ring as a guide. Get a piece of material for a screen and bolt it together for cheap. I think I sold them for $20 shipped. EHS was not making them anymore I believe. This one is for the ATC
(http://i58.tinypic.com/r9h7wp.jpg)

Title: Air box lids
Post by: mrtwidster1 on April 17, 2014, 07:32:36 AM

^^^^ PM sent Tony

Title: Air box lids
Post by: Pumashine on April 17, 2014, 08:56:44 AM

Quote from: mrtwidster1;31720

^^^^ PM sent Tony

Last kit sold! I just got the airbox lid with a hole cut in it on my 450r. Just use the bag over the K&N.