TRX250R.ORG

Workshop => Carburetor, Intake, and Exhaust => Topic started by: udontknowme on April 18, 2014, 10:52:48 AM

Title: methanol
Post by: udontknowme on April 18, 2014, 10:52:48 AM

not sure if a asked this question before but heres the situation. its 6hr round trip drive to get vp M1. i used it before and works good but a pain in the ass to get it. fuel distibutor down the street has no name methanol and claims its race grade and 10 bucks cheaper than vp. anyone tried the no name stuff and does it work just as good with no problems ?

Title: methanol
Post by: Rupp250 on April 18, 2014, 01:52:38 PM

This is where I get my fuel, 110 or methanol. It may be no name to others but is well known around me.

http://www.ercracingfuels.com/

I have also picked up some no name methanol from the refinery for someone else to do runs on a dyno. 200hp+ sled motors and seemed to work fine for him. As long as it is from a clean source I think you will be fine.

Title: methanol
Post by: Morse250r on April 18, 2014, 02:52:07 PM

I use Sunoco 175 for 55 gal and lasts awhile I'd look around

Title: methanol
Post by: rsss396 on April 18, 2014, 04:11:59 PM

I normally use the methanol I get outside the silverlake park it sold in bulk to Duneland ATV and honestly have not noticed a difference from the VP methanol