TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: ikas on April 23, 2014, 01:51:08 PM

Title: Laeger narrow measurements/or drawing.
Post by: ikas on April 23, 2014, 01:51:08 PM

Hello, does anyone have any info into building your own chassis? Been looking into building a replica of a Laeger narrow frame with a no-link setup. But the problem is that i can't find any measurements or drawings of the frame.

I have all the info I need to machine my own protrax spindles.

The main reason for the project is that I have a gasgas ec300 engine that is standing on the shelf after switching engine in my last build.

I'm from Sweden by the way.

Title: Laeger narrow measurements/or drawing.
Post by: Hawaiiysr on April 23, 2014, 02:23:08 PM

We all would be interested in pro trax spindles if you could make them. The specs are here in this site. I'm sure a few select members have the specs of a narrow frame. Hold on they will chime in...

Title: Laeger narrow measurements/or drawing.
Post by: Hawaiiysr on April 23, 2014, 02:27:06 PM

You said you already have it just for good reading,
http://trx250r.org/threads/2263-Laeger-T-Pin-Pro-Trax-Spindle-Rebuild-information-Part-Numbers

Title: Laeger narrow measurements/or drawing.
Post by: ikas on April 23, 2014, 02:47:21 PM

Seen that thread before when searching for the frame measurements. Very helpful info :)

Title: Laeger narrow measurements/or drawing.
Post by: zcarlson12 on April 23, 2014, 08:12:06 PM

What all do you need for measurements? I have a Laeger narrow no link.

Title: Laeger narrow measurements/or drawing.
Post by: Langbolt on April 23, 2014, 08:41:04 PM

I knew I should have done a drawing of it when I got it!!!

:(

Title: Laeger narrow measurements/or drawing.
Post by: ikas on April 24, 2014, 01:45:28 AM

I would be glad if someone could help me get as many measurements as possible. Haven't had a "normal" geometry quad in the garage since 2012.

I would highly appreciate if someone could get me measurements of the a-arm mountings, shock mounts front and rear, swingarm mounts, suspension rake in the front and measurements for the steering stem. And if it's possible some measurements of a set of +4+1 a-arms and a no-link swingarm.

I would be very happy if someone took the time to do that for me. It would be a very kind thing to do. And I would without hesitation help you guys with anything you need. Like if I could get a line of protrax spindles fabricated.
(http://forums.trx250r.org/vbulletin_imports/447_1740_2017-04-18_4440.jpg)