TRX250R.ORG

Workshop => Carburetor, Intake, and Exhaust => Topic started by: Bio86 on May 05, 2014, 08:36:10 AM

Title: 44mm Lectron Meth to Gas
Post by: Bio86 on May 05, 2014, 08:36:10 AM

Anyone know if it's possible to tame down a 44 lectron to run on a stock cylinder 293cc?  Right now it's setup for meth running a pump and dual lines to the power jet, regular clear bowl.  I have one laying around so figured I'd attempt before buying another carb.  Any suggestions are appreciated.

Title: 44mm Lectron Meth to Gas
Post by: rsss396 on May 05, 2014, 08:51:22 AM

yes just call dennis packard racing and he will sell you a gas needle and a float needle for gravity feed, the powerjet will just be run at a couple turns open normally. 7-2 is a typical gas needle and the float needle is a Mikuni piece

Title: 44mm Lectron Meth to Gas
Post by: seanoktm on May 05, 2014, 09:43:21 AM

Call Dennis at packard like rsss396 said. I run 4-2xl needles in 36/38mm lectrons on my girl friends gas 4mm stock cylinder banshee.

Title: 44mm Lectron Meth to Gas
Post by: Bio86 on May 05, 2014, 03:39:23 PM

Awesome, thanks guys I'll give him a shout.