TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: aberegg05 on May 06, 2014, 09:23:23 PM

Title: cylinder and piston question
Post by: aberegg05 on May 06, 2014, 09:23:23 PM

If I put a 68.5mm 86 piston in an 87 cylinder with a long rod crank do I need a spacer plate?

Title: cylinder and piston question
Post by: Jerry Hall on May 07, 2014, 11:52:37 AM

Quote from: aberegg05;33326

If I put a 68.5mm 86 piston in an 87 cylinder with a long rod crank do I need a spacer plate?

Yes you need a 4.5mm thick spacer plate with a 0.5mm thick base gasket on each side of the spacer plate.