TRX250R.ORG

Classifieds => For Sale => For Sale - Parts => Topic started by: Gilfiah89 on June 06, 2014, 08:20:22 AM

Title: Ftz 370 power valve 4 mil stroker
Post by: Gilfiah89 on June 06, 2014, 08:20:22 AM

Ftz power valve 4 mil stroker runs great put ur reed an ignition in and go lost intest in the bike I was building motor is sitting on shelf for 6 months time to let someone else enjoy the fun of this power house motor..$2000 dollors jug alone cost that all fresh bearings and seals limited time on motor.. Also have a fresh 270 for sale and lots of atc parts(http://forums.trx250r.org/vbulletin_imports/890_2195_2017-04-18_6099.jpg)(http://forums.trx250r.org/vbulletin_imports/890_2196_2017-04-18_6707.jpg)(http://forums.trx250r.org/vbulletin_imports/890_2197_2017-04-18_2482.jpg)(http://forums.trx250r.org/vbulletin_imports/890_2198_2017-04-18_6786.jpg)(http://forums.trx250r.org/vbulletin_imports/890_2199_2017-04-18_8823.jpg)(http://forums.trx250r.org/vbulletin_imports/890_2200_2017-04-18_9163.jpg)

Title: Ftz 370 power valve 4 mil stroker
Post by: Gilfiah89 on June 26, 2014, 04:56:54 AM

Back to top make offer need gone

Title: Ftz 370 power valve 4 mil stroker
Post by: Trx450racer0 on June 26, 2014, 06:01:05 AM

Is the 270 just the top end or a complete motor

Title: Ftz 370 power valve 4 mil stroker
Post by: Gilfiah89 on June 26, 2014, 06:39:38 AM

Complete motor

Title: Ftz 370 power valve 4 mil stroker
Post by: t0mmyt24 on June 26, 2014, 08:14:42 PM

How much hp does the 370 put out?

Title: Ftz 370 power valve 4 mil stroker
Post by: Kevhes11 on June 26, 2014, 09:11:57 PM

You really told us a lot about what you're charging 2,000 for...

Title: Ftz 370 power valve 4 mil stroker
Post by: Gilfiah89 on June 26, 2014, 09:18:33 PM

If u have a question pm me.. Never had it on a dyno but I would say over 100 have a lot of 250rs and this one pulls the hardest and has the broadest power

Title: Ftz 370 power valve 4 mil stroker
Post by: gibson265r on July 27, 2014, 04:05:36 PM

100 hp???? Not a chance

Title: Ftz 370 power valve 4 mil stroker
Post by: Mickkey82984 on July 28, 2014, 07:20:51 PM

Quote from: gibson265r;39936

100 hp???? Not a chance

It thought the same thing, I don't think the saber I bought is over 100 with a full drag port and drag pipe.

Title: Ftz 370 power valve 4 mil stroker
Post by: gibson265r on July 28, 2014, 07:34:56 PM

I'm sure it's a sweet motor but 100hp is way off the reservation.  Ive got a built 330 and it shreds, but it's only pushing high 50's

Title: Ftz 370 power valve 4 mil stroker
Post by: JesseA420 on July 29, 2014, 08:40:35 AM

what clutch setup?? tranny?? top end?? porting? crank? head setup for what fuel??

Title: Ftz 370 power valve 4 mil stroker
Post by: Gilfiah89 on August 21, 2014, 10:38:09 AM

Tttt my 310 built by arlan puts out 75 so u better do some upgrading Gibson265r

Title: Ftz 370 power valve 4 mil stroker
Post by: Jerry Hall on August 21, 2014, 11:54:45 AM

Quote from: Gilfiah89;41422

Tttt my 310 built by arlan puts out 75 so u better do some upgrading Gibson265r

 
75 HP on a 310  ?????????????????????

 Was it on nitrous and alcohol?

Show us the dyno sheets!

Title: Ftz 370 power valve 4 mil stroker
Post by: Hurley250R on August 21, 2014, 11:58:47 AM

:popcorn:

Title: Ftz 370 power valve 4 mil stroker
Post by: JesseA420 on August 21, 2014, 12:09:09 PM

Quote from: Gilfiah89;41422

310 built by arlan puts out 75

(http://i2.kym-cdn.com/photos/images/original/000/061/508/whatisthis.png)


today on the show we have professor gill dangus from the college of laser beams and ray guns. hes here to explain to us how he powers his prox 310 and prox 370 to 75 and 100 hp with the tears of diseased and dying box jellyfish.
LETS CHECK IT OUT


 here is a dyno from arlan of a 300.
(http://www.ledperformanceengines.com/images/trx300dyno1.JPG)

obviously you dont actually want to sell this, otherwise you would have actually posted answers to my questions, either that or you dont know any of those things about it, which i am sure is the case, and explains also why you think a 310 makes 75hp LOL.

Title: Ftz 370 power valve 4 mil stroker
Post by: Rupp250 on August 21, 2014, 01:14:38 PM

Well this was a good way to wake up with a chuckle.

Don't throw out dyno numbers if you really have no clue what it makes, or have heard it should make. If you truly do have the dyno sheets tell me where this dyno is cause I need to run my bikes on it.

Title: Ftz 370 power valve 4 mil stroker
Post by: udontknowme on August 21, 2014, 10:32:21 PM

.242 hp per cc is one hell of a accomplishment