TRX250R.ORG

General => Pics and Vids => Topic started by: Morse250r on June 21, 2014, 11:19:10 PM

Title: Packard puma times from the Michigan national races
Post by: Morse250r on June 21, 2014, 11:19:10 PM: Very pleased with how it's running (http://forums.trx250r.org/vbulletin_imports/167_2375_2017-04-18_5913.jpg)(http://forums.trx250r.org/vbulletin_imports/167_2376_2017-04-18_5928.jpg)
Title: Packard puma times from the Michigan national races
Post by: sanddad21 on June 22, 2014, 12:11:30 AM: Nice reaction on the first run, and you road around him on the second. GOOD JOB
Title: Packard puma times from the Michigan national races
Post by: rsss396 on June 22, 2014, 07:16:31 AM: Great Job!!
Title: Packard puma times from the Michigan national races
Post by: toydoc on June 22, 2014, 07:16:48 AM: Cool!

That 60' time is everything :peaceful:
Title: Packard puma times from the Michigan national races
Post by: Morse250r on June 22, 2014, 08:06:46 AM: I found one more 4.1 pass in my junk pile of slips. 1.5 60' again. I'm gonna try a diff chassis now and see if that changes anything.

Need to find a jockey too haha
Title: Packard puma times from the Michigan national races
Post by: kb250r on June 22, 2014, 08:18:55 AM: Nice going morse ,with them times look like you have a pretty good jockey
Title: Packard puma times from the Michigan national races
Post by: Rupp250 on June 22, 2014, 09:33:03 AM: That 60ft on the first is nice. Good job
Title: Packard puma times from the Michigan national races
Post by: DnB_Racing on June 22, 2014, 09:58:39 AM: Quote from: sanddad21;37252
Nice reaction on the first run, and you road around him on the second. GOOD JOB
what type of tree do you guys use? the few times I've raced we used full tree and a perfect light was .500 after last amber and when tire rollout has cleared the box before actual ET starts. prestage light then staging light comes on meaning your at the line

a .500 is the time from when the last amber light shuts off and the green starts, any thing under .500 is a red light,

ive also seen pro tree when they light all 3 amber at the same time then green, on those it takes .400 from the last amber till green, so in this case anything under .400 is a red.

so Im curious how you guys do it, a .000 raction time as Ive done it means you've left the line and cleared staging light with front tire rollout before the light is green...

just curious how you guys do it???

I just noticed your using a .400 so a pefect light would be .400, and it looks like the slip adjusts for the time but not for the rollout,

would that mean your tire cleared the last stage light (start line) just as it turned green?...just trying to understand the system your running for lights...
Title: Packard puma times from the Michigan national races
Post by: Quick310r on June 22, 2014, 05:55:16 PM: Good job, very impressive times....!!!!
Title: Packard puma times from the Michigan national races
Post by: Morse250r on June 22, 2014, 10:10:37 PM: I'm not sure on the lights they say there I thought a perfect cut light would be a .004 these tickets were using pro lights I usually run sportsman.
Title: Packard puma times from the Michigan national races
Post by: Honda863 on June 23, 2014, 12:34:06 AM: Awesome numbers get this 60's in the 1.4s and you'll be in the 3s great job
Title: Packard puma times from the Michigan national races
Post by: jadleybray on June 24, 2014, 11:52:41 PM: Morse, great runs!!!! .06 is damn quick!!! The slip shows the tree as a .400 light meaning a perfect light would be .400.
Title: Packard puma times from the Michigan national races
Post by: Morse250r on April 02, 2016, 01:39:30 PM: Been awhile since I updated this post. I've put a remote start on and have bought some ti bolts and a cf strut.best time last year was a 4.01 and it poped out of gear. Big hopes this year to get into the 3's club. Also put a new piston in it. Ran the old one for about 4 years 😬

(http://forums.trx250r.org/vbulletin_imports/167_7500_2017-04-18_4158.jpg)(http://forums.trx250r.org/vbulletin_imports/167_7501_2017-04-18_3360.jpg)(http://forums.trx250r.org/vbulletin_imports/167_7502_2017-04-18_6258.jpg)(http://forums.trx250r.org/vbulletin_imports/167_7503_2017-04-18_2313.jpg)(http://forums.trx250r.org/vbulletin_imports/167_7504_2017-04-18_1820.jpg)
Title: Packard puma times from the Michigan national races
Post by: Rupp250 on April 02, 2016, 03:03:44 PM: Looking good. Good luck this year.
Title: Packard puma times from the Michigan national races
Post by: jadleybray on April 02, 2016, 09:16:35 PM: One of the nicest Hondas ever built
Title: Packard puma times from the Michigan national races
Post by: Morse250r on June 26, 2016, 08:30:39 PM: Here is an update from the Michigan nationals this past weekend. I was fortunate enough to have the world class rider Jeff Paterson ride my quad. Best last year was a 4.01 and track record at west Michigan. I've had a goal for a year or so now of a 3.99. Well this weekend I met that and exceeded it. 3.93 was the best. He thinks 80's were there but near the end of the day it was starting to shift hard. Pulled off some 1.4 60' times. Here are some pics.

(http://forums.trx250r.org/vbulletin_imports/167_7952_2017-04-18_6538.jpg)(http://forums.trx250r.org/vbulletin_imports/167_7953_2017-04-18_1079.jpg)
Title: Packard puma times from the Michigan national races
Post by: Morse250r on June 26, 2016, 08:35:01 PM: Some vids of it running on my YouTube morse250r
Title: Packard puma times from the Michigan national races
Post by: bcm on June 26, 2016, 10:40:41 PM: I watched all three of your videos on YouTube, that is one bad @$$ drag bike
Title: Packard puma times from the Michigan national races
Post by: havinnoj on June 27, 2016, 12:31:52 AM: Really awesome to see these numbers [MENTION=167]Morse250r[/MENTION].

Here's the link to his YouTube:
https://www.youtube.com/user/morse250r/videos (https://www.youtube.com/user/morse250r/videos)
Title: Packard puma times from the Michigan national races
Post by: JohnTabata1 on June 27, 2016, 01:29:47 AM: Congrats!
Title: Packard puma times from the Michigan national races
Post by: JesseA420 on June 27, 2016, 06:38:48 AM: cool vids. what times did you run on it?
Title: Packard puma times from the Michigan national races
Post by: Morse250r on June 27, 2016, 10:52:50 AM: 3.93 was the best and a bunch of 3.95-3.99 off the trailer with some changes over the winter it was a 4.02 that was a new rider on it too, once I dialed the carb a bit it started picking up from there.
Title: Packard puma times from the Michigan national races
Post by: Big_Mike on June 27, 2016, 05:39:54 PM: Quote from: toydoc;37260
Cool!

That 60' time is everything :peaceful:

Absolutely agreed! That 60' is killer!!!
Title: Packard puma times from the Michigan national races
Post by: JesseA420 on June 28, 2016, 07:45:09 AM: ya thats cool, i meant did you personally make any passes on ur own bike?
Title: Packard puma times from the Michigan national races
Post by: Morse250r on June 28, 2016, 12:24:17 PM: no I haven't its all set up for a light rider right now, last time I ride it I ran 4.2's 4.3's very consistently.
Title: Packard puma times from the Michigan national races
Post by: Piediddy on June 29, 2016, 09:05:22 PM: Good Job Morse, it sounds good and crisp. You still running the CPI pipe and 48 Lectron? Whoever is riding it is treeing the hell out of the other guys ha
Title: Packard puma times from the Michigan national races
Post by: Morse250r on June 30, 2016, 03:08:23 PM: CPi yes and I bumped it to a 50mm over the winter... jeff hes a great rider, he mostly rides for k and t thanks !