TRX250R.ORG

Classifieds => Wanted => Topic started by: Dreamer on June 24, 2014, 11:21:06 AM

Title: Intake boot
Post by: Dreamer on June 24, 2014, 11:21:06 AM

Looking for a motor side intake boot that is still pliable with no cracks. Going to be going on a 38mm carb so it needs to stretch.

Title: Intake boot
Post by: jcs003 on June 24, 2014, 11:36:02 AM

this is your best bet: http://www.ebay.com/itm/UPP-Intake-Manifold-38-39mm-TRX250R-ATC250R-TRX250-ATC250-TRX-ATC-250R-250-R-/191225076882?pt=Motors_ATV_Parts_Accessories&hash=item2c85e71c92&vxp=mtr

but my personal choice is a boyesen rad valve: http://www.ebay.com/sch/i.html?_trksid=p2047675.m570.l1313.TR0.TRC0.H0.Xboyesen+rad+valve+trx250r&_nkw=boyesen+rad+valve+trx250r&_sacat=0&_from=R40

john

Title: Intake boot
Post by: aztecgwynn on June 24, 2014, 12:58:32 PM

Get the carb bells sides machined to turned down!
I had mine done by ESR and I don't have to wrestle with anything when installing.
And cheaper to machine carb bells than buying aftermarket intake. It was cheaper for me but also another option.

Title: Intake boot
Post by: Dreamer on June 24, 2014, 01:23:07 PM

Mine had cracks in it alrady and just got worse when i tried to install it so i need a new one anyway. I also already have v force 3 reeds to i don't really want to buy the boyseen and replace it.

Title: Intake boot
Post by: Dreamer on June 24, 2014, 01:43:10 PM

just picked up a upp 38mm of amazon for 52 and some change. forgot i had credit card reward points too so i didn't pay anything out of pocket

Title: Intake boot
Post by: JesseA420 on June 24, 2014, 03:37:29 PM

cant beat that! good call