TRX250R.ORG
Workshop => Suspension and Chassis => Topic started by: Pj Uptmor on July 05, 2014, 10:17:14 AM
-
I am trying to find a location to mount the front shocks reservoirs. I kno on the front frame is there any other places. If do can you post pictures. Thank you
-
On the side of the frame right behind the radiator is the next location I am doing.
(http://i62.tinypic.com/2ilbsd2.jpg)
-
Thank you Tony on the quick reply. Can you take a picture of the oil going over the radiator. Did you cut the shrouds ?
-
Can you take a picture of the oil going over the radiator. Did you cut the shrouds ?
Mark Myers sent me this pic to show where he wanted the rezi's located. I was just showing a location. I have also seen them going straight back towards the motor. I will make an effort to make them fit either way when in the programing stage.
-
My oil lines can go over the radiator but they are short and be rubbing on the radiator hose. I thought about before the radiator by the steering stem. Just looking at my options Thank you Paul
-
Mine are up front. I'll get a pic in a bit
Here a pic of Jon's before the bike left
(http://i59.tinypic.com/35c2wxc.jpg)
(http://i58.tinypic.com/2whp7vk.jpg)
-
I mount mine is the same location.
-
To run the rezi back of the radiator do you have a longer oil line .
-
I mount mine up front with Tony's holders.
-
Thank you for your input
-
If you don't need to adjust them while you are riding....I would say in front of any heat source. Radiator, Exhaust, Motor,....Fronts right? If you don't have long lines , frame tubes in front of the radiator are best....or(http://forums.trx250r.org/vbulletin_imports/172_2480_2017-04-18_9984.jpg)
-
Thank you Tony on the quick reply. Can you take a picture of the oil going over the radiator. Did you cut the shrouds ?
That photo was actually the rear shock rezzy, not the front. It's located there per Elka instruction.
-
Put piggyback clamps on them.