TRX250R.ORG

Workshop => Body and Controls => Topic started by: Flyin_250r on August 07, 2014, 10:06:43 PM

Title: Rath nerfs
Post by: Flyin_250r on August 07, 2014, 10:06:43 PM

I'm in the market for some nerfs for my lobo. I really love the look of the rath signature series nerfs. Has anyone tried them? I know there's a few. Just wondering what your figment was like?  Heard good and bad. I'd love to use some IMS pegs since that's the only roll part I don't have on it, but I think some rath nerfs would be sweet. Also, does anyone have any nerfs on a stock 88-89 frame they can measure the spacing for me center to center. Wondering if its the same or close to my lobos spacing

Thanks,

Craig

Title: Rath nerfs
Post by: Tbone07 on August 08, 2014, 03:00:13 PM

Not the same mounts but here's a good pic for reference. The bite on the pegs is insane, my boots probably won't last very long

And we want some more pics of that RX7
(http://i1060.photobucket.com/albums/t457/tbone0785/TRX250R/20130916_192223_zps1d8c8324.jpg)

Title: Rath nerfs
Post by: 89Longrod on August 09, 2014, 07:47:55 PM

Whats up with that Rx-7 is it a twinny? Got any more pics? I thinks Burns has a set with the heel guards Rath built for him.

Title: Rath nerfs
Post by: ryanowarrior on August 09, 2014, 11:00:09 PM

Quote from: Tbone07;40604

And we want some more pics of that RX7

Just over look the wheels :D

craig have you called up rath and ask them yet?

Title: Rath nerfs
Post by: Flyin_250r on August 09, 2014, 11:59:06 PM

Lol smartass

Tbone those are what I want, but with heel guards.

Ryan I contacted them and they just said they can do them, just needs measurements. I guess I'm doubting my measuring skills lol.

I'll post a couple pics of the car tomorrow. It's a single turbo setup 13b. 1993 FD. I don't know how to post a pic from my phone on this site.

Title: Rath nerfs
Post by: Flyin_250r on August 10, 2014, 04:11:26 PM

Quote from: ryanowarrior;40671

Just over look the wheels :D

craig have you called up rath and ask them yet?

Here's a pic of the car. The front fender had some slight damage, which has now been fixed. Check out those rims eh Ryan! Lol

Title: Rath nerfs
Post by: rablack21 on August 10, 2014, 06:40:39 PM

If you guys wanna take a look at my build thread, I am running the exact ones you are talking about.
http://trx250r.org/threads/3189-Project-Younger-Woman/page2?highlight=younger+woman (http://trx250r.org/threads/3189-Project-Younger-Woman/page2?highlight=younger+woman)

Title: Rath nerfs
Post by: pinned250r on August 10, 2014, 09:07:25 PM

I'm digging it craig! The lobo and the rx(even the rims). Unfortunately no info from me on the nerfs as I do not like them at all(personal pref). The red plastics look good with the silver frame though! Way better than silvers would look :)

Title: Rath nerfs
Post by: Flyin_250r on August 11, 2014, 02:03:22 PM

Quote from: rablack21;40707

If you guys wanna take a look at my build thread, I am running the exact ones you are talking about.
http://trx250r.org/threads/3189-Project-Younger-Woman/page2?highlight=younger+woman (http://trx250r.org/threads/3189-Project-Younger-Woman/page2?highlight=younger+woman)

Yeah those are exactly what I am after. How was the fitment? I've heard the horror stories, but really want them lol.

Title: Rath nerfs
Post by: Flyin_250r on August 11, 2014, 02:04:09 PM

Quote from: rablack21;40707

If you guys wanna take a look at my build thread, I am running the exact ones you are talking about.
http://trx250r.org/threads/3189-Project-Younger-Woman/page2?highlight=younger+woman (http://trx250r.org/threads/3189-Project-Younger-Woman/page2?highlight=younger+woman)

Yeah those are exactly what I am after. How was the fitment? I've heard the horror stories, but really want them lol.

Title: Rath nerfs
Post by: Flyin_250r on August 11, 2014, 02:07:36 PM

Quote from: pinned250r;40713

I'm digging it craig! The lobo and the rx(even the rims). Unfortunately no info from me on the nerfs as I do not like them at all(personal pref). The red plastics look good with the silver frame though! Way better than silvers would look :)

Thanks man. These are the two toys I've wanted for years and years lol. Cars basically done, lobo will be soon, then onto the Walsh hybrid lol. Should be a nice lineup, but I still need a nice xc R. I agree on the red plastics, might switch them up for the new white fullbores eventually lol.

Title: Rath nerfs
Post by: rablack21 on August 11, 2014, 02:17:03 PM

They really weren't bad at all. I wouldn't hesitate in recommended them to anyone. You do have to drill your own holes to mount the nerfs to the mounting brackets, but that is the hardest part. It lines up decently. And finally, they are built super tough, and like Tbone said, you can't beat the grip. Most people that I know who have them have never had to change the teeth out ever.

Title: Rath nerfs
Post by: Flyin_250r on August 11, 2014, 06:07:54 PM

I think I'm going to give them a try. Have to save, they aren't cheap lol.

Title: Rath nerfs
Post by: ryanowarrior on August 11, 2014, 11:54:08 PM

Can't hide money....but plz let's keep this thread on track...NO CAR PICS :D

Title: Rath nerfs
Post by: Flyin_250r on August 12, 2014, 10:25:24 AM

Quote from: ryanowarrior;40770

Can't hide money....but plz let's keep this thread on track...NO CAR PICS :D

Just keep that ugly Beamer off of it and all will be good! Lol