TRX250R.ORG
Site Sponsors => LED Performance => Topic started by: 2ndmoto on August 22, 2014, 12:08:57 AM
-
There was some interest in how the LED intake fit the Roll Design Lobo frame. I thought I would share some pictures.
(http://forums.trx250r.org/vbulletin_imports/738_2822_2017-04-18_7587.jpg)(http://forums.trx250r.org/vbulletin_imports/738_2816_2017-04-18_4515.jpg)(http://forums.trx250r.org/vbulletin_imports/738_2823_2017-04-18_9433.jpg)(http://forums.trx250r.org/vbulletin_imports/738_2824_2017-04-18_4934.jpg)(http://forums.trx250r.org/vbulletin_imports/738_2821_2017-04-18_2981.jpg)(http://forums.trx250r.org/vbulletin_imports/738_2825_2017-04-18_4276.jpg)
Plenty of clearance around the plastics (old Fullbore), frame and head-to-pump coolant hose. I did end up running a different coolant hose that runs from the pump to the radiator. There are some frame supports that push the stock hose too close to the pipe. It is a Gates hose Part# 19707. Had to do a little trimming, but it fit well.
There might be a better hose out there, but this was available at the auto parts store...and, come hell or high water, I was going riding the next day. The crude exhaust bracket was my own design, as Roll failed to design a frame with an exhaust mount. I had to run this bracket back to the gas tank mount. I'll have LED fab me up something soon.
Here is the Intake. LED does make a few different ones. This one is specific to the Lobo chassis. It is tight, but there is clearance from the shock being fully extended to bottomed out. I am going to see about getting an air box made.
(http://forums.trx250r.org/vbulletin_imports/738_2818_2017-04-18_67.jpg)(http://forums.trx250r.org/vbulletin_imports/738_2820_2017-04-18_8848.jpg)(http://forums.trx250r.org/vbulletin_imports/738_2826_2017-04-18_8886.jpg)(http://forums.trx250r.org/vbulletin_imports/738_2827_2017-04-18_3749.jpg)
If you would like to see any specifics, let me know.
Best Regards
-Jason
-
awesome bike. Great pics. Thank you.
-
Sick lobo. That danhung's old chassis? I'd love a intake to mount to a stock airbox. I don't think I'm alone on that matter either lol
-
You are not alone
-
You guys running lobos? I'll be going over to LED in a week or two. I'll see if Arlan has interest in building them.
Best regards
-Jason
-
Yeah I am
-
How about one for a no link lrd frame? Or do I have to modify a stock frame led intake to fit my lrd frame?
-
You guys running lobos? I'll be going over to LED in a week or two. I'll see if Arlan has interest in building them.
Best regards
-Jason
Man I need those pegs and nerfs bad lol. Did you get the heel guards Dan had with them also?
-
No heel guards. Are the nerfs hard to find? It is getting ripped down soon for a color change.
On the LRD Frame, I am not sure. I know the tubing is larger than a stock frame. So it would need a different mount. As far as fitting the frame, you would have to call Arlan and ask. But I will ask him next time I see him.
Best Regards
-Jason
-
No heel guards. Are the nerfs hard to find? It is getting ripped down soon for a color change.
On the LRD Frame, I am not sure. I know the tubing is larger than a stock frame. So it would need a different mount. As far as fitting the frame, you would have to call Arlan and ask. But I will ask him next time I see him.
Best Regards
-Jason
I haven't looked too deep yet, but probably. The roll pegs are I think the only roll part I'm not running yet due to wanting nerf bars.