TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: CeaserTheThird on September 02, 2014, 10:26:04 PM

Title: Spacer Plate - Questions ( Dowel pins )
Post by: CeaserTheThird on September 02, 2014, 10:26:04 PM

Question - do I need to purchase longer dowel pins to compensate for spacer plate ?
I did measure and they do extended out. But not sure if this will be a problem.

Order New " OEM stock size 12x20 " - dowel pins extend out 5.50 MM ( will this be safe to insure the cylinder stays in place ? )

Pictures

I did order the correct longer studs off the CR :)

(http://i72.photobucket.com/albums/i167/ceaserthethird/B8B6094F-B2B3-43A3-A726-E3E0F367CEEC_zpsgjjgq1dm.jpg) (http://s72.photobucket.com/user/ceaserthethird/media/B8B6094F-B2B3-43A3-A726-E3E0F367CEEC_zpsgjjgq1dm.jpg.html)
(http://i72.photobucket.com/albums/i167/ceaserthethird/37052A42-3980-4B8B-9EFC-E326C762F293_zpsiljyezxs.jpg) (http://s72.photobucket.com/user/ceaserthethird/media/37052A42-3980-4B8B-9EFC-E326C762F293_zpsiljyezxs.jpg.html)

Title: Spacer Plate - Questions ( Dowel pins )
Post by: Bowtie316 on September 03, 2014, 08:11:45 AM

I used stock alignement barrels with the .190 spacer plate with no issues.

Title: Spacer Plate - Questions ( Dowel pins )
Post by: F-Red on September 03, 2014, 12:29:21 PM

Those will work just fine.

Title: Spacer Plate - Questions ( Dowel pins )
Post by: CeaserTheThird on September 03, 2014, 01:29:01 PM

Great awesome, thank you.