TRX250R.ORG

Workshop => Body and Controls => Topic started by: Quinnlt4 on September 04, 2014, 12:56:12 PM

Title: Fullbore fitment
Post by: Quinnlt4 on September 04, 2014, 12:56:12 PM

After waiting, praying and hoping that I could get a nice set of fullbores for a decent price I finally found a set. They arrive and they don't fit my 86 frame very well. I took the rubber grommets off my OEM front fenders and put them in the FBs but the fenders don't line up with the little post that the grommets pop into on the frame... The posts I am talking about are where the front and rear fenders over lap. Anybody come across this? Short of rounding the hole on the fenders out I don't know what to do.

Thanks

Title: Fullbore fitment
Post by: fx4pitrone on September 04, 2014, 01:04:50 PM

My fullbores fit on there but it was a stretch to get them there.... Maybe try loosening the front fender braces above the radiator and you can get a little more play that way?

Title: Fullbore fitment
Post by: Quinnlt4 on September 04, 2014, 01:18:39 PM

I had them loose when I was trying. I am running a maier tank cover and I noticed that the fullbores wrap up onto the tank. Wondering if the extra width of the cover is making it sit higher....? And if I install an IMS 4gal will I have to trim the fenders? I hate cutting into them

Title: Fullbore fitment
Post by: Pumashine on September 04, 2014, 02:00:29 PM

From the day it is molded plastic shrinks. It is constantly drying out and shrinking through out its life. The other day I measured a sheet of plastic 120 1/4" in the sun. The next morning in the shade it measured 119 3/4" Had shrunk a half inch going from hot to cold. Try getting your plastic in the sun for a couple hours to see if it will grow any to help the fit.

Title: Fullbore fitment
Post by: Flyin_250r on September 04, 2014, 05:44:51 PM

Just sell them! Lol. What colour?

Title: Fullbore fitment
Post by: Quinnlt4 on September 04, 2014, 05:55:55 PM

Black  front and rear with a quad tech hood. All for 300$ shipped! But they don't fit....

Title: Fullbore fitment
Post by: rk88r on September 04, 2014, 06:08:46 PM

Longer front mounting brackets may help also.

Title: Fullbore fitment
Post by: Rockingkfarms on September 04, 2014, 09:16:46 PM

My fullbores fit my Laeger narrow with no issues but had to be cut for the 4.0 tankIn my opinion the quality is better than maier but still not Oem.

Title: Fullbore fitment
Post by: bnau267 on September 04, 2014, 11:12:50 PM

I love the look of them and hate the fit.  I'm 2 for 4 on Fullbores.  Always have problems around the tank.  One thing worth noting is that the OEMs allow for some adjustability in the rear.  You can make the mount a little oblong like the stockers to help.

Title: Fullbore fitment
Post by: Quinnlt4 on September 05, 2014, 04:44:25 PM

Well....I figured it out, removed the maier tank cover and fits like a glove. The added thickness of the cover is just enough to mess everything up.

Title: Fullbore fitment
Post by: Quinnlt4 on September 09, 2014, 12:36:56 PM

If anyone can, I would like to see some pictures of how you trimmed your fullbores for an IMS 4gal tank

Title: Fullbore fitment
Post by: sameltoe on September 09, 2014, 06:10:00 PM

(http://i1347.photobucket.com/albums/p701/samw450r/20131003_194018_zpsccj2d7or.jpg) (http://s1347.photobucket.com/user/samw450r/media/20131003_194018_zpsccj2d7or.jpg.html)