TRX250R.ORG
Workshop => Engine and Bottom End => Topic started by: big specht on September 04, 2014, 11:10:57 PM
-
I'm looking to build a cr500 for a pulling bike I'm looking for info on where to get parts or who is good with these 500 motors if I'm going to spend the money I don't to blow it on any rum dumb with a grinder. I'm looking for a drag pipe for it too. I'm probley going to use the cr500 frame and make it a 3 wheeler.
-
Try LED Performance. They are doing custom pipes and Arlan is a magician with porting. I was looking at one of my old cylinders. He ported it in 2001. The serial number was over 1900. That means in 2001 he had almost 2000 ported cylinders under under his belt. I'm not sure what he is up to now.
Anyways, check them out, definitely worth a call
Best regards
-Jason
-
I would suggest you build a CP Industries Liger cylinder you can get them in 94,97 and 102.5 bores
my 97bore x 83stroke dynoed 110 at the rear wheels on methanol
(http://i870.photobucket.com/albums/ab265/rsss396/613cc4pipebest3runs_zps15c74a9c.jpg) (http://s870.photobucket.com/user/rsss396/media/613cc4pipebest3runs_zps15c74a9c.jpg.html)
-
I'm not sure if I want to go with the liger jug cause I know what this will make a great big snow ball that going to require a lot more parts to hold and use the full potential of power those parts can make BUT DAMN it would be fun to ride lol. Thanks for the info so far I just need to sh%t or get off the pot on this project
-
Well i have a 86 and a 89 cr500 witch motor should I use ? I know the 89 need the crank rebuilt thats why I'm planning on stroking it while I'm in there
-
One name for cr500..glen howell at gss raceporting..he's doing a full port race cyl for my cr500af now. Nobody comes close to Glen on cr500 work. Be prepared for a long wait, he is really popular with the guys in the know.. could be several months till he gets to your cylinder but well worth the wait!
-
IIRC, 89-92 cr500 had a closer ratio transmission than the previous and later models. I prefer the wider ratio, but I'm not pulling on a trike either. The close ratio of the 89 might be better suited for that than the wider ratio trans.
If I get time I'll look up what years had what ratios for sure. Or you can check Google or cr500 riders forum
-
Talk to Roosty over cr500riders.com. He'll point you in the right direction(be sure to post first in the intro section). Roosty should be able to fix you up. If nothing else you can check out some reports on GSS and make up your own mind. My cr500 is a bike. It really doesn't need any more power(it makes enough for me and I'm used to riding liter bikes on the street). BTW 86 parts are harder to find.
-
BTW mine is a 85. Honda did mellow the cr's over the years. I've thought about doing an af conversion with my other 85 motor, but I really like riding the steely, drum rear brake and all LOL.
-
What happened to the other responces?
-
I think u and Everyone else knows exactly were they went. Go ahead and advertise somewere else. This is a 250r forum. Not a sell my cr500: crap forum.
-
Why dont you (CR500 guy) post your OWN thread in the Lounge....from time to time their are some that run a CR500 in 250r frames......But don't think your going to start posting in every thread pitching sales for your business....I don't care if you are a CR500 Guru your not going to wreck this site like the other .Net site was......
-
Why did you guys delete the posts? I was really interested in that dirt bike chit. I have been looking for a guy that could do that mod on my quad- remove two of the wheels but add twice the cc's, im down.:greedy_dollars:
-
and a extra 50hp. sheesh who wouldnt want that
-
What was that place he was advertising for i think he is in pa that's somewhat close to me
-
What was that place he was advertising for i think he is in pa that's somewhat close to me
Just google Chris Mills. The pics he posted were fake. He is an internet scammer. Rich boy lying his way through life. Has burned many people and we don't screw our members over. The new guys need to know this guy is the wrong way to go. He is not welcome here as he has stolen pics from members here claiming they are his own. Put it this way. He is a virus and should be avoided at all costs!
-
^^^That's funny:smoking
-
Ok thanks for the heads up
-
I would suggest you build a CP Industries Liger cylinder you can get them in 94,97 and 102.5 bores
my 97bore x 83stroke dynoed 110 at the rear wheels on methanol
(http://i870.photobucket.com/albums/ab265/rsss396/613cc4pipebest3runs_zps15c74a9c.jpg) (http://s870.photobucket.com/user/rsss396/media/613cc4pipebest3runs_zps15c74a9c.jpg.html)
I have billet liger cases in stock! Don't ruin stock cases Chris I-don't-care
-
Pica are far from fake Your just Jealous :)
(http://forums.trx250r.org/vbulletin_imports/1171_3886_2017-04-18_8390.jpg)
CHRIS MILLS
I-don't-care
-
hey chris mills i sent you pm y u no pm back
-
Here's the real Chris Mills:
"Do you dirt poor scumbags think i care what you say aby collectionout me lol. You ppl in jackson county are like sand between my toes! This place is full of back stabbing, jealous trash! The pigs and the court house is the most corrupt people/place around! You losers can think what you want but i dont care because at 24 i have more money than anyone else around here in my safe besides my father and 1.4 million in my collection of motorcycles of all types. I can buy anything i want and love that luxury :) Get used to it losers i have it all and still not done buying whatever i want. HAVE FUN LIVING THE CRUMMY LIFE WHILE IM LIVING THE DREAM :)
PS jackson county cops your nothing but underpaid and underlaid losers!!!
CHRIS MILL$"
-
:thread_hijacked::carlos::carlos::carlos::carlos::carlos:
:ban?:
-
I like your subtle approach Jesse but you probably hit the nail on the head. Tbone I saw that post too, some people right?
Sent from my EVO using Tapatalk
-
chris mills if i hold a light bulb in one hand and stick my finger from the other hand in the bulb socket will it light up?
-
At first I was like :smug: but now I'm :confusion:
Rsss96 that liger looks healthy!! And your signature is quite refreshing compared to tos
Still say you want 500cc go zilla motor. Next would be cp industries, but your putting that on weaker, compared to zilla, trans and cases. Not to mention more $$$$ Just mo
-
chris mills if i hold a light bulb in one hand and stick my finger from the other hand in the bulb socket will it light up?
I think it would all depend on your electrolyte count ;). You drink your Gatorade? lol
Sent from my EVO using Tapatalk
-
Most cr500 guys(and others too) have seen that build pic FOR YEARS NOW, but I can't think of anyone that's seen it finished(not to mention run). It's like a unicorn LOL. BTW this guy is an alleged thieving scumbag by ALL the reports I've seen/read on numerous sites. That post above by Tbone, if true(and I'm not saying it's not), shows what a real class act he is.
-
Damn this went south fast lol
-
Damn this went south fast lol
Thanks to a low life scum. Criss Mills 603 kis mymills
Sorry for your thread getting derailed. If you would like it all nice I can fix it. Of course I will have to ban Chris