TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: Vroomy on October 02, 2014, 09:57:26 AM

Title: Need nikasil plating
Post by: Vroomy on October 02, 2014, 09:57:26 AM

Hi where would be the cheapest place to send a Duncan pc2000 cylinder to be renikasiled and get new piston/ ring set? Duncan quoted me $620! Must be a cheaper way surely?

Title: Need nikasil plating
Post by: seanoktm on October 02, 2014, 10:07:29 AM

Millennium Technologies check with them

Title: Need nikasil plating
Post by: Tbone07 on October 02, 2014, 01:40:28 PM

Quote from: seanoktm;43709

Millennium Technologies check with them

X2. They did my PC2000 cylinder about a year ago.

What is included in the $620 price?

Title: Need nikasil plating
Post by: rk88r on October 02, 2014, 04:44:31 PM

Should be able to do it for about $450 with piston. x3 on millennium.

Title: Need nikasil plating
Post by: Langbolt on October 02, 2014, 09:53:35 PM

Have you checked these guys out ?

http://www.electrosil.com.au/news3.htm

:)

Title: Need nikasil plating
Post by: JesseA420 on October 03, 2014, 09:29:13 AM

Quote from: Langbolt;43768

Have you checked these guys out ?

http://www.electrosil.com.au/news3.htm

:)

mmmmm, me likey

Title: Need nikasil plating
Post by: Deuce on October 03, 2014, 06:25:16 PM

I was very happy when I used Millenium for a 4 stroke cylinder...  I'd just get a new piston and send it along with the cylinder to them.

Title: Need nikasil plating
Post by: udontknowme on October 04, 2014, 01:07:14 AM

ive checked milleniums plating work  with bore gauges and didnt really find anything to complain about but ill never have them weld anything again after they botched my last cylinder though. ill be doing my own chamfering as well. from what ive seen in the past they put a huge chamfer on the windows which is fine for most people but thats not how i want mine. so basically only thing ill use millenium for is to apply the plating and ill do all the rest

Title: Need nikasil plating
Post by: Jerry Hall on October 04, 2014, 02:51:53 PM

I have used all of the plating companies and have had the least problems with Millenium's plating, and cylinder repair