TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: dirtyd on October 24, 2014, 08:32:50 PM

Title: 14mm ball joints
Post by: dirtyd on October 24, 2014, 08:32:50 PM

I was thinking about replacing my ball joints as it looks like there are 3 different brands of ball joint on my a-arms (was like this when I bought them used a few years ago). They are Burgard +2 arms and I believe they are 14mm. The ball joints themselves  seem to be fine but I don't like how some of them the nut is 3/4 threaded on.
Does any body know anything about these?
http://www.ebay.com/itm/TRX450R-450R-250R-400EX-Z400-LTZ400-A-ARM-BALL-JOINTS-4-14mm-/151320149715?pt=Motors_ATV_Parts_Accessories&hash=item233b623ed3&vxp=mtr

Or point me in the right direction for good ones at a good price.

Also I wouldn't mind having some of these for the uppers as my shocks are 1/4" longer than stock and it seems I am at the limit for binding.
http://www.ebay.com/itm/Honda-TRX-250R-TRX250R-Upper-Ball-Joint-Alba-Racing/171097726388?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D26261%26meid%3D6299f46d80fd4542921173ccc42e69f5%26pid%3D100033%26prg%3D10942%26rk%3D4%26rkt%3D4%26sd%3D151320149715

Title: 14mm ball joints
Post by: Leftynanners on October 25, 2014, 02:17:40 AM

I've heard a lot of people using 14mm MOOG ball joints (Part es2074). They're tie rod ends for old b2000's. From what I've seen, they look well made and are priced pretty well. But I've never used them. Maybe somebody here has used them and can chime in and give their 2 cents about it.  

Here's an auction I just found:
http://www.ebay.com/itm/111470283931

Title: 14mm ball joints
Post by: dirtyd on October 25, 2014, 09:27:44 AM

I thought about those too but read that the shank that goes in the a-arm seems to be a little short and the nut barely threads on. Kinda like the situation I have now. I almost think those are what are on the bottoms of mine now.

Title: 14mm ball joints
Post by: jfwyatt1 on October 25, 2014, 02:48:08 PM

i have the laegers +2 a arms that the burgard arms are a copy of what i did was use the moog ball joints on the upper arms and retapped the lowers for ricky stator 16mm ball joints there was plenty of meat on the lowers for it to be completly safe. have been using this setup for over a year with no issues and have had some very hard landings. by both me and my son.