TRX250R.ORG
Workshop => Suspension and Chassis => Topic started by: c_williamson007 on November 18, 2014, 11:57:03 PM
-
I recently picked up a set of works shocks from a member. The shocks were pretty beat and he mentioned that a couple times before he took a payment. The shocks are an older works remote resivoir with a 1.75 in I.D. Spring. It was a triple rate set up but the 2 tender springs were snapped. I would like to do my own rebuild but for starters I can't find replacement springs in that size. If any one could help me out here I would love some information. Thanks in advance.
-
have you tried works? give them a call. they sell direct.
-
have you tried works? give them a call. they sell direct.
I gave them a call befor I received the shocks so when the person I was talking to asked questions about the shocks I didn't have answers so my quest for knowledge did not go very far.
-
I checked out the eibach web site and they do not list a spring with the dimensions I have
-
I would try works again. Pep, they use a lot of the same parts as Works. If you really want to get off the beaten path, try century spring corp.
Best regards
-Jason
-
I would give Andy at Maul Tech a call. He should be able to tell you what length and OD springs you should be running. He's usually pretty easy to get ahold of.
-
Do yourself a favour and just send them to the site sponsor "SRS suspension". He can get them all setup for you looking and running good again.