TRX250R.ORG

Classifieds => For Sale => For Sale - Parts => Topic started by: Flyin_250r on November 27, 2014, 10:49:03 AM

Title: Lobo chassis
Post by: Flyin_250r on November 27, 2014, 10:49:03 AM
So I'm thinking about selling my lobo project I've been working on. This would be for the chassis and suspension only.  The rims/tires in the pictures are not included or forsale. The swing arm does look to have been repaired. There was also a really tiny repair done on one a arm tab. About 1/8", if that.

I'm looking to get around $4400 for the chassis and suspension. The suspensions bump stops are dry rotted and should be replaced. This will be a really sick setup finished. The red fullbores will also be forsale to the buyer at an additional cost.
Title: Lobo chassis
Post by: Flyin_250r on November 27, 2014, 11:05:02 AM
Here's the fullbores.
Title: Lobo chassis
Post by: beobe99 on November 27, 2014, 03:01:22 PM
OMG I hate you, a LOBO and a white FD3S sitting in the garage? What the hell dude! :sorrow:

Awesome! Good luck with the sale although I doubt you'll need it!

So what Mods on that 7? I see Apexi exhaust? And?
Title: Lobo chassis
Post by: havinnoj on November 27, 2014, 03:49:09 PM
Quote from: beobe99;46754
OMG I hate you, a LOBO and a white FD3S sitting in the garage? What the hell dude! :sorrow:

Awesome! Good luck with the sale although I doubt you'll need it!

So what Mods on that 7? I see Apexi exhaust? And?

X2 - good luck with sale and please post up another thread (if you don't mind) about your RX-7.. that just looks bad from the little bit I can see!
Title: Lobo chassis
Post by: supernutt on November 27, 2014, 07:13:59 PM
Where is the quad located at?
Title: Lobo chassis
Post by: Flyin_250r on November 27, 2014, 08:23:14 PM
Quote from: beobe99;46754
OMG I hate you, a LOBO and a white FD3S sitting in the garage? What the hell dude! :sorrow:

Awesome! Good luck with the sale although I doubt you'll need it!

So what Mods on that 7? I see Apexi exhaust? And?


That's my real toy lol.

Good eye on the exhaust. You're right. It has a single turbo setup done and some other small mods lol. It dyno'd at 412whp. She's a fun toy. I have a Walsh yz hybrid project I'm going to be selling too.
Title: Lobo chassis
Post by: Flyin_250r on November 27, 2014, 09:15:53 PM
Quote from: supernutt;46764
Where is the quad located at?


The quad is located near Niagara Falls Canada. I have no problem shipping it, or meeting someone within a reasonable distance.
Title: Lobo chassis
Post by: pinned250r on November 28, 2014, 06:44:04 PM
Ill still take those wheels off you for the price you paid for them :)

Wish i could've pulled the trigger on this chassis the first 28 times you offered it to me lol. Still cant though haha. Good luck buddy!
Title: Lobo chassis
Post by: beobe99 on November 28, 2014, 08:31:46 PM
Quote from: Flyin_250r;46767
That's my real toy lol.

Good eye on the exhaust. You're right. It has a single turbo setup done and some other small mods lol. It dyno'd at 412whp. She's a fun toy. I have a Walsh yz hybrid project I'm going to be selling too.

Yes, RX7's are a special kinda toy no doubt! Japanese cars are my main hobby (Honda / Subaru's mostly) so I know them well! Just turns out building Quads and bikes is cheaper (and sometimes even profitable as compared)..

I saw your Walsh as well, your definitely doing it right haha!
Title: Lobo chassis
Post by: Flyin_250r on November 29, 2014, 12:27:33 AM
Lol thanks man. The shamrocks won't be sold, sorry about your luck!
Title: Lobo chassis
Post by: sameltoe on November 29, 2014, 12:40:53 AM
Those rears are they sham's or omf?
Title: Lobo chassis
Post by: Flyin_250r on November 29, 2014, 03:16:32 PM
Quote from: beobe99;46801
Yes, RX7's are a special kinda toy no doubt! Japanese cars are my main hobby (Honda / Subaru's mostly) so I know them well! Just turns out building Quads and bikes is cheaper (and sometimes even profitable as compared)..

I saw your Walsh as well, your definitely doing it right haha!

Thanks man. Wish I had more room, then I could have a couple more toys lol
Title: Lobo chassis
Post by: Flyin_250r on November 29, 2014, 03:17:56 PM
Quote from: sameltoe;46808
Those rears are they sham's or omf?



Man I wish they were shamrocks lol. I gave up on finding some. I am looking for some 9" beadlock rears. I'd love to find matching scallops
Title: Lobo chassis
Post by: Flyin_250r on November 30, 2014, 07:37:40 PM
Bump
Title: Lobo chassis
Post by: PNWrider on December 01, 2014, 12:50:46 PM
Are you interested in any trades?
Title: Lobo chassis
Post by: Flyin_250r on December 01, 2014, 01:19:30 PM
Quote from: PNWrider;46913
Are you interested in any trades?


Not really, but I guess it depends on what it is. Kind of clearing room in the garage.
Title: Lobo chassis
Post by: Flyin_250r on December 14, 2014, 07:58:03 PM
Bump
Title: Lobo chassis
Post by: Number22 on January 31, 2015, 03:42:52 PM
PM Sent
Title: Lobo chassis
Post by: bnau267 on February 05, 2015, 10:26:55 PM
that other roll for sale yet?
Title: Lobo chassis
Post by: sameltoe on February 05, 2015, 11:26:23 PM
Quote from: bnau267;49854
that other roll for sale yet?
say whaaaaaat
Title: Lobo chassis
Post by: bnau267 on February 06, 2015, 12:18:33 AM
wish full thinking...:)
Title: Lobo chassis
Post by: Flyin_250r on February 06, 2015, 11:44:50 AM
The silver chassis is sold


Everything has a price... Not sure
you'd like to see the price though Bob lol
Title: Lobo chassis
Post by: Flyin_250r on February 18, 2015, 04:36:23 PM
Everything has a price... Not sure
you'd like to see the price though Bob lol[/QUOTE]