TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: 96bansheepilot on January 02, 2015, 10:23:32 AM

Title: 450r hubs and brakes on 250r arms, possible?
Post by: 96bansheepilot on January 02, 2015, 10:23:32 AM

Is is possible to bolt 04-05 450r spindles, hubs and brakes on a 250r chassis w lonestar rec/play a arms?

would the ball joints fit into the hubs? Any machining needed? Anyone done this?
thx!

Title: 450r hubs and brakes on 250r arms, possible?
Post by: rk88r on January 05, 2015, 07:55:19 PM

Yes, on some Hermann arms anyway.

Title: 450r hubs and brakes on 250r arms, possible?
Post by: trx250scar on January 05, 2015, 08:20:40 PM

Yea they will go right on. I have them on my dc4 lsr arms and my son has them on his houser arms. The ball joint is the same diameter were it goes thru the spindle.

Title: 450r hubs and brakes on 250r arms, possible?
Post by: trx250scar on January 05, 2015, 08:23:40 PM

I c u r kinda near me. I am just south of ocala.  Got any real good riding down there?

Title: 450r hubs and brakes on 250r arms, possible?
Post by: dem3500 on January 05, 2015, 09:02:56 PM

I have them on my bike also. They bolt right on but you have to flip one end of the tire rod. Iirc its the spindle end. No big deal.

Title: 450r hubs and brakes on 250r arms, possible?
Post by: 96bansheepilot on January 05, 2015, 09:58:44 PM

Trx250scar not much other than Croom.  There is a cool spot in Haines city but croom and ocala are our spots.

Title: 450r hubs and brakes on 250r arms, possible?
Post by: trx250scar on January 05, 2015, 10:14:24 PM

We used to ride ocala a lot until they did closures and trailheads. Now we hardly ride there at all and it's 10 minutes from my house.