TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: Holt on February 14, 2015, 09:28:29 PM

Title: caliper rebuild
Post by: Holt on February 14, 2015, 09:28:29 PM

Does anyone do caliper rebuilds? If so how much? There seized up and I can't get them loose. Its for my ATC.
Thanks
Holt

Title: caliper rebuild
Post by: thesmith87250r on February 14, 2015, 10:47:05 PM

what cant ya get loose ? pins for brake pads. and what calipers ya need might have them pm me. mine are from a 85.

Title: caliper rebuild
Post by: Holt on February 15, 2015, 07:45:51 AM

Pistons are locked up.

Title: caliper rebuild
Post by: KASEY on February 15, 2015, 09:04:32 PM

I can rebuild them or sell you a good working one,, your choice ..

Title: caliper rebuild
Post by: Holt on February 15, 2015, 09:49:17 PM

Kasey I will be getting in touch about rebuilding them in the next few weeks

Title: caliper rebuild
Post by: Morse250r on February 15, 2015, 10:15:31 PM

To pop them out I know shooting grease in it will push them out.  A grease gun has some crazy amount of pressure. My dad just did it on a barn find honda cb 350 1974

Title: caliper rebuild
Post by: KASEY on February 16, 2015, 10:57:38 PM

I have a test bench setup with a porta power pump . that way I can test them and make sure they hold pressure overnight without leaking,,

Title: caliper rebuild
Post by: Rupp250 on February 17, 2015, 10:20:08 AM

I had some spare calipers that had froze. I used a grease gun threaded onto the caliper. It pushed right out.