TRX250R.ORG

General => Projects => Topic started by: Burns363R on February 18, 2015, 09:26:17 AM

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 09:26:17 AM

Well its that time of year, parts are coming in the door. Bike is about to be reassembled. I hope to have the frame this week, so i will be posting more on it later in this thread. But for now here are my new Silver Fullbores and new SSI decals graphics installed.

Also what to thank all my sponsors for the 2015 year.

BDT motorsports
RRR (Root River Racing)
SSi Decals
Maul Tech Suspension
Rath Racing
Fourwerx Carbon
Oneal
SVK

The bike is a 2001 (i think) Laeger Narrow CR500 Link frame. It has +4 Roll Design Long Travel arms with 400ex spindles and adapters to run 250r calipers. The front shocks are Custom Axis triple rate Comp/Reb Adjust done by Maul Tech. The rear is a Laeger Swing arm with CR500 linkage and a single rate Custom Axis comp/reb adjust done by Maul Tech.

The motor is a BDT ported Sphynx 363 stroker motor with a custom Wurks pipe and a 40.5mm Airsryker carb.

(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150208_190446_zpsodcqftvz.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/20150211_115502_zpsfwst077g.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/20150213_151815_zpskmqxqear.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/10968508_444700822350618_6847026960373015573_n_zpsf1b7wyx7.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150212_195211_zpsuyvztanj.jpg)

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 09:27:06 AM

(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150212_195253_zpshhjlmkbg.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150212_195300_zpsa30hwt9e.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150214_144109_zpsepmdxt7u.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150214_144119_zps5rsevwxe.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150214_144130_zpsniwdiznm.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150215_192559_zpsi0pyg5lx.jpg)

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 09:27:36 AM

(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150215_192612_zpsntjpiftz.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150217_200202_zps1ezwrmps.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150217_200211_zpspp9jaxif.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150217_200211_zpspp9jaxif.jpg)

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 09:28:20 AM

Some pics of the 450R fenders.
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150208_150427_zpsm8ahdzkw.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150208_150435_zpsdvn8bp1e.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150208_150443_zpsgf5ljwbr.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150208_150457_zpsoc4rwagc.jpg)

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 09:29:04 AM

The 450R front fenders are actually a bit different. I changed the graphics for the front fenders because i have the incorrect ones installed on the outside.  I need to update my pics.

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 09:31:21 AM

I'm planning on powder coating the 3 springs on the front shocks.  The main spring will be candy blue.  The middle spring will be black, the top spring will be silver.   All my anodized parts will be done today, so there should be a lot of progress. on it.  I hope to have it all done but the shocks by this weekend.

Title: Burns363R 2015 MX bike build.
Post by: JesseA420 on February 18, 2015, 09:46:04 AM

i love the color, those roll a arms are longggggggg

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 10:07:56 AM

Ya the front end is 49.5" with the +4 arms 4:1 rims and narrow frame.

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 01:26:25 PM

Anodizing is complete. It turned out a little lighter than i wanted but should look good. may even add some contrast.  

(http://i158.photobucket.com/albums/t82/BurnsMGT/20150218_121842_zpstaldygco.jpg)

Title: Burns363R 2015 MX bike build.
Post by: rablack21 on February 18, 2015, 05:48:58 PM

Looking sharp Kyle! I noticed you got a new set of holeshots. You not running the DWT's anymore? I think I'm about to switch back to holeshots myself. Nothing else I've tried hooked up quite as well as the holeshot did.

Title: Burns363R 2015 MX bike build.
Post by: zcarlson12 on February 18, 2015, 06:59:00 PM

Looks awesome Kyle. I really like the front number plate shape on the R hood.

Title: Burns363R 2015 MX bike build.
Post by: Tbone07 on February 18, 2015, 07:16:07 PM

Hmm I like that anodizing.....what's the cost comparison vs. powder coating?

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 18, 2015, 08:06:50 PM

Ya I like the new ITP fronts. They loom mean. I have always been a hole shot guy. The DWT ' S were great. But not reversible. I'm trying some changes for this season. I think this will be a key for my program.

The anodizing was free for me. But I'm not to happy with the color. May be trying a different color. I was holding for a closer match.

Title: Burns363R 2015 MX bike build.
Post by: Tbone07 on February 18, 2015, 10:18:02 PM

Quote from: Burns363R;50416

The anodizing was free for me. But I'm not to happy with the color. May be trying a different color. I was holding for a closer match.

I agree. They look a little too much like baby blue, while your frame is more of a candy

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 21, 2015, 04:44:25 PM

(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150221_144309_zpsoem5amsx.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150221_144318_zpsjrre1pnr.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150221_144327_zpso5doo7kl.jpg)

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 22, 2015, 05:24:07 PM

Sunday Update.  Need a few small parts, and i need to put my 450R motor together.  Also got my Smart Carb back from APT, so i will be doing some testing on it to see if it will finaly work like it should.

(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150222_155046_zpsuv7xgrfl.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150222_155030_zpsuzrif5xg.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150222_155021_zpsdvn7p3ug.jpg)
(http://i158.photobucket.com/albums/t82/BurnsMGT/Mobile%20Uploads/20150222_155017_zpsfathlqmf.jpg)

Title: Burns363R 2015 MX bike build.
Post by: Trusty2stroke on February 22, 2015, 05:42:55 PM

Those Shamrocks on the xc bike look wicked cool with the annodized rings!

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 22, 2015, 07:40:44 PM

Thanks. I really don't like the color of them. May re color them.

Title: Burns363R 2015 MX bike build.
Post by: Tbone07 on February 22, 2015, 08:27:19 PM

Now you've got me thinking about building a 450r to match my Laeger.

Title: Burns363R 2015 MX bike build.
Post by: Burns363R on February 23, 2015, 01:27:50 PM

Ya it will be nice to have matching bikes. Just need to find some silver fenders for my 450R some day.

Title: Burns363R 2015 MX bike build.
Post by: oldschoolr on February 23, 2015, 01:57:03 PM

They all look good Burns.