TRX250R.ORG
Workshop => Suspension and Chassis => Topic started by: zcarlson12 on February 24, 2015, 11:32:48 AM
-
Could someone that has a Laeger wide or std frame with +3 a-arms measure their brake lines please? I'm using a stock length stem so if yours is different I can figure that out. Trying to get an idea of what length I'll need for the ones I'm ordering. I'm going with dual front lines and a single rear from this company if anyone wanted to check them out. http://www.coremoto.com/?gclid=CIr_p8qA-8MCFZSCaQodfW8Aag
-
Nobody?
-
If it wasn't -15 out I might be able to lol. I'm at +1+1 stem narrow frame and +3 arms, with plenty of slack. So i'll be pretty close to you.
-
Lol ya it's cold as hell here too. If you get a chance in the near future I'd appreciate it man.
-
Well I used a piece of Ethernet cable and came up with about 47.5". Does that seem right?
-
I was going to go with the lines from the link in my original post but these would be $80 cheaper. Has anyone used these? 54" seems really long for the front and 25" for the rear sounds long too.
http://www.ebay.com/itm/Front-Rear-Brake-Lines-Steel-Honda-TRX250R-250R-Black-/380382043665?pt=Motors_ATV_Parts_Accessories&hash=item5890895e11&vxp=mtr
-
Zak, I have +3 a-arms in the front. I can measure mine if you like.
-
That would be great Ryan thanks. I just really hate ordering parts and then having to return them because I didn't do some investigating first.
-
That would be great Ryan thanks. I just really hate ordering parts and then having to return them because I didn't do some investigating first.
No problem. Just text me about 8pm tonight if you haven't heard from me by then.
-
Will do, thanks Ryan.
-
Mine are right at 53"
-
Mine are 55 narrow front +4 arms
-
Thanks guys! I went with the kit in the link above from Streamline. I guess I'll find out if they work this weekend.