TRX250R.ORG

Classifieds => For Sale => For Sale - Parts => Topic started by: seanoktm on March 23, 2015, 09:48:56 PM

Title: 394 DMR Polonda
Post by: seanoktm on March 23, 2015, 09:48:56 PM

Honda 250r 394 DMR polonda 83.5mm bore cylinder,head,boyseen reeds,alum manifold,stock stroke crank with welded tins with new 132mm ktm rod with maybe an hour on it and a 44mm lectron dual power jet needs new floats. Has a pe1 needle and a pump seat. Cylinder porting was changed some by JDI racing from how Dave had it setup. $750shipped for it all i will not separate. Pm me for more details and pictures.
(http://forums.trx250r.org/vbulletin_imports/86_4864_2017-04-18_1570.jpg)

Title: 394 DMR Polonda
Post by: seanoktm on March 27, 2015, 08:12:37 AM

Ttt

Title: 394 DMR Polonda
Post by: seanoktm on April 01, 2015, 10:15:25 PM

$650 shipped

Title: 394 DMR Polonda
Post by: Hawaiiysr on April 02, 2015, 12:49:17 AM

Forgive me for asking but is this set up for drag?

Title: 394 DMR Polonda
Post by: seanoktm on April 02, 2015, 06:39:45 PM

It's drag ported and setup for methanol

Title: 394 DMR Polonda
Post by: seanoktm on April 10, 2015, 10:04:05 AM

$600 shipped

Title: 394 DMR Polonda
Post by: seanoktm on April 12, 2015, 10:28:47 AM

Someone needs this. Nothing wrong with it. It ran good when i had it together. I only took it apart to to put the override i had in it in another motor when i sold it then decide to use the internals and cases for another motor.

Title: 394 DMR Polonda
Post by: seanoktm on April 15, 2015, 12:33:34 AM

$550 shipped

Title: 394 DMR Polonda
Post by: jadleybray on April 15, 2015, 04:51:51 PM

Cheap!!!

Title: 394 DMR Polonda
Post by: KASEY on April 15, 2015, 10:09:17 PM

if it wasn't drag ported I would be interested.. just because its unique!

Title: 394 DMR Polonda
Post by: seanoktm on April 16, 2015, 08:26:37 AM

The port timing are pretty mild for a drag setup I cant remember what they are for sure but i think its around 196 exhaust and 128 transfers. I could be wrong cant remember fro sure but i know they seemed low compared to the port timings on my puma. Dave didn't build high strung motors more like an aggressive duner on alky.

Title: 394 DMR Polonda
Post by: seanoktm on April 24, 2015, 09:40:16 AM

still got it.

Title: 394 DMR Polonda
Post by: seanoktm on May 05, 2015, 08:31:46 AM

sold