TRX250R.ORG
Workshop => Suspension and Chassis => Topic started by: Victork on April 06, 2015, 08:52:41 PM
-
The swing arm is a LSR and the skid plate is prm from my old oem swing arm which i redrilled the rear holes and welded the piece underneath that just goes around the rear nuts and protects them. Anyway, it doesnt seem like a chain guide will have space. Id like to get a T.M. guide if it will fit. Perhaps somebody can break out the measuring tape and see how long the guide is?(http://forums.trx250r.org/vbulletin_imports/79_5040_2017-04-18_6499.jpg)
-
Have to cut one or the other...I've seen Sameltoe post a pic of his with the chain slider cut and I bought a swingarm that had the skid plate cut. Hope this helps.
(http://forums.trx250r.org/vbulletin_imports/803_5043_2017-04-18_3793.jpg)
-
The TM has rollers on the bottom so that must be a no go if i opt to cut the guide which i think id rather do. Any clue where the pic sam posted of his cut guide is?
-
The TM has rollers on the bottom so that must be a no go if i opt to cut the guide which i think id rather do. Any clue where the pic sam posted of his cut guide is?
His was cut off the bottom if I remember correctly, maybe he will chime in.
-
There must be more who came across this also
-
(http://i1310.photobucket.com/albums/s659/cynnsam/FB_IMG_1425908500140_zpsr2xurods.jpg) (http://s1310.photobucket.com/user/cynnsam/media/FB_IMG_1425908500140_zpsr2xurods.jpg.html)
-
Thanks, this is how ill do it
-
You can still see my marker line lol I just held it up close and dotted each end and then with a straight line connected and sanded to the bold ace line :)