TRX250R.ORG

Workshop => Carburetor, Intake, and Exhaust => Topic started by: Junk450rr on April 10, 2015, 12:13:02 AM

Title: Wide open throttle!
Post by: Junk450rr on April 10, 2015, 12:13:02 AM

hey people this is my first time on one of these sites, got a 250 frame with an Elsinore 450r motor in it. I kick it over and the throttle has trouble coming back and stays wide open, had a problem with a plastic notch that would guide the cylinder up and down straight but it was supposedly fixed but I just started it up for the first ride and I get down the block and it sticks wide.

Title: Wide open throttle!
Post by: JesseA420 on April 10, 2015, 07:12:06 AM

take apart carb and throttle assembly, and inspect cable, carb, and throttle assembly to find your binding.

Title: Wide open throttle!
Post by: Junk450rr on April 10, 2015, 05:45:07 PM

Quote from: JesseA420;52919

take apart carb and throttle assembly, and inspect cable, carb, and throttle assembly to find your binding.

Thanks jesse found the problem was in the cable, wasn't sliding in its housing so cleaned it and put a couple more spacers in to keep it tight. Runs good now!

Title: Wide open throttle!
Post by: rk88r on April 10, 2015, 06:34:19 PM

Show us some pics of your Elsinore hybrid.

Title: Wide open throttle!
Post by: jcs003 on April 11, 2015, 04:29:51 AM

Quote from: rk88r;52943

Show us some pics of your Elsinore hybrid.

x2

john