TRX250R.ORG

Workshop => Carburetor, Intake, and Exhaust => Topic started by: F-Red on April 28, 2015, 12:29:20 PM

Title: Keihin PWK Air Striker Float Level
Post by: F-Red on April 28, 2015, 12:29:20 PM

I fired up the 350. Took her down the road for a little test ride. Going through the first couple of gears, down shifting no problem. Got her up into fourth, and she dies. Like I lost power or fuel. I checked the obvious, spark, fuel flow out of the petcock. Everything checks out. Removed and cleaned the carb. No signs of debris or any blocked orifices. So I check the float level, blowing in the fuel inlet, it shuts off at this position. Does this look a little low? And could this be my problem, with the bowl running out of fuel? I checked the gas cap vent and all the vent hoses, on the carb. Thanks guys.

(http://i532.photobucket.com/albums/ee328/RideRed187/250R%20Pics%20Parts/A9F8249C-75FB-4B60-B869-E1604AC8FE41.jpg)
(http://i532.photobucket.com/albums/ee328/RideRed187/250R%20Pics%20Parts/B912C38D-ACCE-484A-AE92-81803E37EC81.png)

Title: Keihin PWK Air Striker Float Level
Post by: JesseA420 on April 28, 2015, 12:59:28 PM

float height should be 16mm or .630

Title: Keihin PWK Air Striker Float Level
Post by: F-Red on April 28, 2015, 02:46:27 PM

Quote from: JesseA420;53803

float height should be 16mm or .630

From the bottom of the float, to the edge of the carb, where the bowl sits. Thanks Jesse.