TRX250R.ORG

General => Lounge => Topic started by: PNWrider on May 22, 2015, 04:06:22 PM

Title: Number plate
Post by: PNWrider on May 22, 2015, 04:06:22 PM

Just wondering how all you racers have your number plates attached to your R's. I feel like I'm missing some hardware on my rear plate. Post pictures of your front and rear plates. Especially with duncan front bumpers

Title: Number plate
Post by: PNWrider on May 22, 2015, 04:08:42 PM

Here's mine, not sure of the brand, just found it in a pile of parts
(http://forums.trx250r.org/vbulletin_imports/71_5413_2017-04-18_8096.jpg)

Title: Number plate
Post by: dem3500 on May 22, 2015, 09:07:42 PM

I just used zip ties. Haven't had a problem.

My plates only came with zip ties anyway. You must have got the super deluxe kit haha
(http://i537.photobucket.com/albums/ff335/dem3500/TRX250R/IMG_20150405_151349179_zpsqhc4ryxx.jpg) (http://s537.photobucket.com/user/dem3500/media/TRX250R/IMG_20150405_151349179_zpsqhc4ryxx.jpg.html)

Title: Number plate
Post by: dem3500 on May 22, 2015, 09:16:07 PM

I did stickers on my hood for the front. I liked how that looked better than the plate on the bumper. Just personal preference. Although the plate would work good as a mud blocker lol
(http://i537.photobucket.com/albums/ff335/dem3500/TRX250R/IMG_20150507_122915_zpskhqxozzv.jpg) (http://s537.photobucket.com/user/dem3500/media/TRX250R/IMG_20150507_122915_zpskhqxozzv.jpg.html)

Title: Number plate
Post by: PNWrider on May 23, 2015, 11:41:57 AM

Quote from: dem3500;54615

I just used zip ties. Haven't had a problem.

My plates only came with zip ties anyway. You must have got the super deluxe kit haha

Yeah I was thinking zip ties for the rear plate. I was messing with my R yesterday and think I figured out a solution  I used my old brake light brackets and it fits pretty well. For the front it looks like I'll have to actually put some sticker numbers on the hood, a zip tied front plate on the bumper looked kindve funky on my duncan racing bumper

Title: Number plate
Post by: 2ndmoto on May 23, 2015, 06:49:27 PM

Pretty sure the ac rear grab bars have tabs welded in place to mount the plate to. You could use bolts to attach.

Title: Number plate
Post by: PNWrider on May 23, 2015, 07:09:11 PM

Yeah I realized my grab bar just didn't have the brackets

(http://forums.trx250r.org/vbulletin_imports/71_5420_2017-04-18_8446.jpg)

(http://forums.trx250r.org/vbulletin_imports/71_5421_2017-04-18_5282.jpg)

Title: Number plate
Post by: dem3500 on May 23, 2015, 10:39:24 PM

Looks good!

Title: Number plate
Post by: Hawaiiysr on May 24, 2015, 12:35:21 PM

When I was younger and use to race my blaster I made a rear number plater out of a food tray. I just cut it to a size similar to a store bought # plate. I zip tied it to my grab bar just like the picture here. It worked good and looked way better then what most other guys at the track came up with.(http://forums.trx250r.org/vbulletin_imports/219_5422_2017-04-18_760.png)

Title: Number plate
Post by: Pumashine on May 24, 2015, 07:32:34 PM

I cut this one for Johann Morse. Going up front on his drag bike. Holes for screws or zip ties
(http://i57.tinypic.com/19l76a.jpg)

Title: Number plate
Post by: Pumashine on September 25, 2015, 10:08:55 AM

Looks great Johann Morse

(http://i59.tinypic.com/mskart.jpg)

Title: Number plate
Post by: zcarlson12 on September 25, 2015, 10:55:42 AM

I ziptied the front one and the rear one came with mounting hardware from AC.

(http://forums.trx250r.org/vbulletin_imports/103_6405_2017-04-18_7041.jpg)
(http://forums.trx250r.org/vbulletin_imports/103_6406_2017-04-18_1893.jpg)

Title: Number plate
Post by: ytman on September 26, 2015, 01:30:49 PM

(http://forums.trx250r.org/vbulletin_imports/172_823_2017-04-18_6030.jpg)
   In the rear you can attatch them to your Patrol Pack...........everyone runs a Patrol Pack right??????hahaha