TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: pantera1975 on May 25, 2015, 06:42:19 PM

Title: Stock cylinder base stud size
Post by: pantera1975 on May 25, 2015, 06:42:19 PM

Im going back to stock cylinder with no spacer plate. My studs are a bit long. What is the actually dimension of the stud I need and thread pitch.

Title: Stock cylinder base stud size
Post by: Skeans1 on May 25, 2015, 06:55:01 PM

Contact Pumashine I'd bet he has a set he'd sell you.

Title: Stock cylinder base stud size
Post by: Pumashine on May 25, 2015, 07:08:08 PM

Partzilla shows http://www.partzilla.com/parts/detail/honda/HP-92900-10045-3B.html      STUD (10X45) Honda part#92900-10045-3B

The taller ones you have are 10x55 thread pitch is 10 x 1.25   These are the ones I stock cause I sell spacer plates. I don't have the shorter ones you want.

Title: Stock cylinder base stud size
Post by: pantera1975 on May 25, 2015, 07:19:55 PM

Thanks Tony. I got some located.