TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: havinnoj on July 08, 2015, 04:28:42 PM

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: havinnoj on July 08, 2015, 04:28:42 PM

Called CT Racing today and they want $25 per o-ring "due to the size and material."  Anyone else have another cheaper source for these or is $25 the going rate?

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: Hawaiiysr on July 08, 2015, 05:02:04 PM

McMaster

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: sameltoe on July 08, 2015, 05:10:24 PM

Anybody have a size, diameter, etc?

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: Skeans1 on July 08, 2015, 05:59:44 PM

25 for a single o ring is nuts lots of sources in Portland

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: JesseA420 on July 08, 2015, 07:01:27 PM

yep check your industrial supply outfits

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: havinnoj on July 08, 2015, 07:47:03 PM

Someone give me the sizes so I can order online lol

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: TRX250RACER on July 08, 2015, 08:02:52 PM

5-1/2 ID and 5-11/16 OD
And it is 3/32" thick

I bought one from Trevor (TLR) a few years back. It was the o-ring and the five stainless bolts for something like $11 if I remember correctly.

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: PNWrider on July 08, 2015, 10:06:48 PM

would this work? http://www.theoringstore.com/index.php?main_page=product_info&cPath=367_23_24&products_id=1136

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: Skeans1 on July 08, 2015, 10:42:06 PM

Quote from: PNWrider;55930

would this work? http://www.theoringstore.com/index.php?main_page=product_info&cPath=367_23_24&products_id=1136

Normally a Viton O ring will do better being it'll take heat better. http://www.theoringstore.com/index.php?main_page=product_info&cPath=367_79_83&products_id=3585

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: Pumashine on July 08, 2015, 11:01:45 PM

Quote from: havinnoj;55912

Called CT Racing today and they want $25 per o-ring "due to the size and material."  Anyone else have another cheaper source for these or is $25 the going rate?

Did Carlos buy out CT?

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: Hawaiiysr on July 09, 2015, 12:35:13 AM

:lol::lol::lol:

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: havinnoj on July 09, 2015, 11:58:20 AM

Quote from: TRX250RACER;55927

5-1/2 ID and 5-11/16 OD
And it is 3/32" thick

Thank you for the sizes!

Quote from: PNWrider;55930

would this work? http://www.theoringstore.com/index.php?main_page=product_info&cPath=367_23_24&products_id=1136

Thanks!

Quote from: Skeans1;55933

Normally a Viton O ring will do better being it'll take heat better. http://www.theoringstore.com/index.php?main_page=product_info&cPath=367_79_83&products_id=3585

Thanks!

Now that we have the size and some options - let's discuss which option (material) would be the best.

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: Skeans1 on July 09, 2015, 12:07:06 PM

Viton will be the best for the application.

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: Pumashine on July 09, 2015, 02:05:43 PM

Quote from: Skeans1;55950

Viton will be the best for the application.

Agreed but both will work. I would just order a couple of each to make sure they are what fit your cover.

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: havinnoj on July 10, 2015, 09:52:18 AM

Thanks guys.  I'll order a couple and try them out.  For peace of mind, has anyone actually ordered either of these specifically?  And how did they fit / work?

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: bholzgen on November 16, 2015, 11:45:37 AM

BUMP this to the top.  Did anyone order any of these rings and try them?

Title: Replacement O-Rings for Hinson Quick Change Covers TRX250R
Post by: havinnoj on November 16, 2015, 11:58:09 AM

Quote from: bholzgen;61024

BUMP this to the top.  Did anyone order any of these rings and try them?

I ordered and received them, but have not installed any.