TRX250R.ORG

Workshop => Carburetor, Intake, and Exhaust => Topic started by: hickwheeler on August 07, 2015, 11:37:52 PM

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 07, 2015, 11:37:52 PM

I have a lrd 350b pipe. Wondering if someone could get me the dimensions of all mounting hardware.
Thank you

Title: lrd bb pipe mounting hardware
Post by: 2ndmoto on August 08, 2015, 01:29:17 AM

pretty sure there is a 3/4" spacer at the silencer. 6x40mm bolts for the adjustment. Cant remember the length of the top hanger...4 maybe 5 inches.

Best Regards
-Jason

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 08, 2015, 03:21:15 PM

thanks for the info

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 09, 2015, 12:25:58 AM

so the lrd pipe doesn't use any rubber isolaters

Title: lrd bb pipe mounting hardware
Post by: 2ndmoto on August 09, 2015, 12:20:13 PM

They were not supplied in their hardware kit. I have never ran any with my lrd pipes. That being said, the lrd pipes are getting old at this point, so it might not be a bad idea to.


Best regards
-Jason

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 10, 2015, 02:02:26 PM

I just took apart the silencer for the big bore pipe. Should the core be smaller than the stinger. It is 1 1/8 od. Stinger is 1 1/8 id.

Title: lrd bb pipe mounting hardware
Post by: 2ndmoto on August 10, 2015, 08:07:55 PM

better question for Arlan. I cant remember, but I thought they used 1.25". I am unfortunately 2500 miles away from mine or I would measure. I do remember it being .125" larger than the standard bore


best regards
-Jason

Title: lrd bb pipe mounting hardware
Post by: hontrx265r on August 11, 2015, 09:39:14 AM

Just all Arlan, he will probably send you hardware and you can ask him about the silencer.

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 15, 2015, 03:15:07 PM

started fitting it in the bike. It doesn't seem to want to clear the fender support bracket. Does it need to be run with race cut fenders?

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 22, 2015, 04:12:53 PM

Made may stinger for the silencer. Welds are not the greatest. But 20 years since I touched a tig torch.

(http://i1198.photobucket.com/albums/aa448/hickwheeler/IMG_20150822_110351910.jpg) (http://s1198.photobucket.com/user/hickwheeler/media/IMG_20150822_110351910.jpg.html)

Title: lrd bb pipe mounting hardware
Post by: 2ndmoto on August 23, 2015, 01:34:20 AM

Ready to rip!

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 23, 2015, 06:58:37 PM

Going to try and get it to the coating place tomorrow after work. So it can be ceramic coated.

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 29, 2015, 05:33:25 PM

got it back and mounted up.
(http://i1198.photobucket.com/albums/aa448/hickwheeler/IMG_20150829_142727808.jpg) (http://s1198.photobucket.com/user/hickwheeler/media/IMG_20150829_142727808.jpg.html)
(http://i1198.photobucket.com/albums/aa448/hickwheeler/IMG_20150829_142743425.jpg) (http://s1198.photobucket.com/user/hickwheeler/media/IMG_20150829_142743425.jpg.html)
(http://i1198.photobucket.com/albums/aa448/hickwheeler/IMG_20150829_142641269.jpg) (http://s1198.photobucket.com/user/hickwheeler/media/IMG_20150829_142641269.jpg.html)

Title: lrd bb pipe mounting hardware
Post by: 2ndmoto on August 30, 2015, 01:31:21 AM

Bringing back memories. Very nice. When are you going to ride it?

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 30, 2015, 10:51:51 AM

going to try to make a day trip to sand lake in September sometime

Title: lrd bb pipe mounting hardware
Post by: Skeans1 on August 30, 2015, 11:12:33 AM

Just let me know when you decide to go I'm right on the way down.

Title: lrd bb pipe mounting hardware
Post by: hickwheeler on August 30, 2015, 11:47:02 AM

Will do if you are planning on going sometime let me know

Title: lrd bb pipe mounting hardware
Post by: 2ndmoto on August 31, 2015, 02:44:59 AM

I'm flying back to Texas or I would join you. I'll check in when I'm back this way.