TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: sam mc 2000 on July 24, 2013, 11:19:38 PM

Title: inner case damage
Post by: sam mc 2000 on July 24, 2013, 11:19:38 PM

well i screwed up i was putting in some gaskets and seals in my cases and today when i was hitting in a brearing my son was running around the gerage with the dog and ran in to me and i hit the inner case right on the half moon where the crank area seperates from the tranny area. It did not gouge the cases but it dimpled or flatspoted a little area on the top of the half moon do you think with honda bond and the center case gasket  will be ok or am i going to have trobel. The pushed in or dimpeled dose not go all the way across the hole flat surface but about 3/4 of it it dose. Thanks for any oppinion or help

Title: inner case damage
Post by: fearlessfred on July 24, 2013, 11:29:39 PM

if u really want some ideas on what to do post a pic of the damage

Title: inner case damage
Post by: Polonda on July 24, 2013, 11:54:40 PM

Yup...pictures.

Title: inner case damage
Post by: CeaserTheThird on July 26, 2013, 05:29:42 AM

Post few pictures like others mentioned, make sure you take them at different angles.