TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: Milton Berry Jr on July 24, 2013, 11:20:12 PM

Title: wilder and longer
Post by: Milton Berry Jr on July 24, 2013, 11:20:12 PM

Ok I want to make my bike wilder and longer how would I know if the parts that I buy from somebody bike and it's a aftermarket frame will they work or I just need to find parts for stock frame only

Title: wilder and longer
Post by: fearlessfred on July 24, 2013, 11:41:11 PM

you will need  to know if the aftermarket that the parts are coming from is narrowed or not. pictures are worth a thousand words

Title: wilder and longer
Post by: jcs003 on July 25, 2013, 06:33:17 AM

Quote from: fearlessfred;5549

you will need  to know if the aftermarket that the parts are coming from is narrowed or not. pictures are worth a thousand words

As fred stated.  we will need pics and possibly measurements to help you determine the specificity of your parts.

john

Title: wilder and longer
Post by: Milton Berry Jr on July 25, 2013, 01:07:38 PM

Thank tou guys so much I will measure mine and go from there

Title: wilder and longer
Post by: fearlessfred on July 25, 2013, 01:28:13 PM

if yours is stock you don't need to measure  , tell us what parts your wanting to swap from what bike

Title: wilder and longer
Post by: Milton Berry Jr on July 25, 2013, 09:32:56 PM

A-arms and tie rods is what I need to go wilder on front right and axle and swing arm on rear  
I'm thinking +2 in front also axle and 4 or 6 on swing arm