TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: pantera1975 on September 19, 2015, 03:22:26 PM

Title: electrical issue with harness
Post by: pantera1975 on September 19, 2015, 03:22:26 PM

I have irriidac voltage onnmy 86 ATC 250R.  Varies between 8 and 75 volts. Ive swapped everything. I did notice when I put rhe multi meter on ohms and beep I have a completed circuit when I test the green and white wires that plugs into the ac regulator it beeps my other 2 harness dont what you think.

Title: electrical issue with harness
Post by: 2ndmoto on September 19, 2015, 04:12:27 PM

You have a short. I don't have a diagram in front of me, but if you are getting continuity where you shouldn't then then the wires are touching somewhere.


Best regards
-Jason

Title: electrical issue with harness
Post by: pantera1975 on September 19, 2015, 04:49:53 PM

such a simple problem once I figure it out