TRX250R.ORG

Other ATV\'s => Other ATV's => Topic started by: Iceracer on November 25, 2015, 01:29:56 PM

Title: Started a new project
Post by: Iceracer on November 25, 2015, 01:29:56 PM
Latest chassis project Integrated Shock mounts Yfz front end for my 500 Ice quad.
(http://forums.trx250r.org/vbulletin_imports/501_6785_2017-04-18_4919.jpg)(http://forums.trx250r.org/vbulletin_imports/501_6786_2017-04-18_1584.jpg)
Title: Started a new project
Post by: 2ndmoto on November 25, 2015, 03:24:53 PM
that is a true project! hats of to you
Title: Started a new project
Post by: rk88r on November 25, 2015, 06:38:04 PM
What do you mean by "integrated shock mounts"?
Title: Started a new project
Post by: Iceracer on December 04, 2015, 03:57:53 PM
Like this
(http://forums.trx250r.org/vbulletin_imports/501_6839_2017-04-18_7873.jpg)(http://forums.trx250r.org/vbulletin_imports/501_6840_2017-04-18_9915.jpg)(http://forums.trx250r.org/vbulletin_imports/501_6841_2017-04-18_481.jpg)(http://forums.trx250r.org/vbulletin_imports/501_6842_2017-04-18_4732.jpg)
Shouldn't be too long now. Making good progress.
Title: Started a new project
Post by: rk88r on December 04, 2015, 06:20:52 PM
I see, that's definitely new to me. It's looking cool.
Title: Started a new project
Post by: havinnoj on December 04, 2015, 08:13:13 PM
Nice. What's the benefit of the integrated shock mount versus the typical shock towers?
Title: Started a new project
Post by: Iceracer on December 05, 2015, 09:41:46 PM
(http://forums.trx250r.org/vbulletin_imports/501_6843_2017-04-18_1142.jpg)It will allow me to run the larger zilla radiator pushes the frame rail out wider.
Title: Started a new project
Post by: Aceman on December 06, 2015, 07:27:10 PM
How are you doing your layout?  Are you using tube bending software?

Nice job so far!!
Title: Started a new project
Post by: Iceracer on December 06, 2015, 09:15:12 PM
Used jd2 to calc the bends.
Title: Started a new project
Post by: Hawaiiysr on December 07, 2015, 01:29:21 AM
More! More!!
Title: Started a new project
Post by: fx4pitrone on December 07, 2015, 08:16:59 AM
Cant wait to see this done!  Sweet work Carl!
Title: Started a new project
Post by: Victork on December 07, 2015, 09:31:12 PM
I wish I had that talent! Be sure to update again.
Title: Started a new project
Post by: Skeans1 on December 07, 2015, 10:37:44 PM
Looks great Carl, what pipe are you going to run on it?
Title: Started a new project
Post by: Iceracer on December 08, 2015, 01:55:25 PM
Not sure on the Pipe, Have a Hall on loan to Ill see if its going to fit and clear the tire screws. I worked on rear suspension linkages yesterday so far TRX 250r or 450r are looking really promising, but the top of shock sits way high in the frame and Id like a straight shot from Filter to carb so Im waiting on a Raptor 660 linkage I just bought for 10 bucks on Ebay.

Should be some new pics this weekend hoping to have it finished up.
Title: Started a new project
Post by: Iceracer on January 12, 2016, 10:11:54 AM
Holiday's slowed me up, a lot.


(http://forums.trx250r.org/vbulletin_imports/501_7031_2017-04-18_4923.jpg)
Title: Started a new project
Post by: rk88r on January 12, 2016, 10:59:50 AM
Going ape hanger on the the bars I see lol.
Title: Started a new project
Post by: Skeans1 on December 01, 2016, 10:32:13 PM
Quote from: Iceracer;63146
Holiday's slowed me up, a lot.


(http://forums.trx250r.org/vbulletin_imports/501_7031_2017-04-18_3750.jpg)

Did you ever finish this Carl?
Title: Started a new project
Post by: Iceracer on December 02, 2016, 08:07:24 AM
Actually Just got back to working on it. Changed a few things from the original plan. Ill get some updated Pictures. I had Dynoport build me a NEW test pipe and I picked up a few hp, I was waiting on a Linkage to try, going with a Cr 500 I had intended to use a No Link for Simplicity, but none of the Angle or mount points worked out. That's been the biggest holdup.
Title: Started a new project
Post by: Iceracer on December 02, 2016, 08:42:26 AM
(http://forums.trx250r.org/vbulletin_imports/501_8410_2017-04-18_9143.jpg)(http://forums.trx250r.org/vbulletin_imports/501_8411_2017-04-18_8927.jpg)
I had a sectional test Pipe built. theres about 10 possible ways to assemble the pipe not including sliding the Dwell anywhere in between min and Max.
This is the same engine I have I run for a Few years on the Ice with varying success. I was Fighting a Engine heat issue. this pipe cures that and makes more power with a lot bigger stinger ID. I can fit the reducer I have over the stinger on any of the other pipes I have tried. Very happy With the result. Now I can add some new porting and maybe a Bigger Carb to.
Hoping to have the chassis done in the next Couple weeks, we will see what happens.
Title: Started a new project
Post by: Skeans1 on December 02, 2016, 09:47:10 AM
Quote from: Iceracer;71034
(http://forums.trx250r.org/vbulletin_imports/501_8410_2017-04-18_3721.jpg)(http://forums.trx250r.org/vbulletin_imports/501_8411_2017-04-18_7348.jpg)
I had a sectional test Pipe built. theres about 10 possible ways to assemble the pipe not including sliding the Dwell anywhere in between min and Max.
This is the same engine I have I run for a Few years on the Ice with varying success. I was Fighting a Engine heat issue. this pipe cures that and makes more power with a lot bigger stinger ID. I can fit the reducer I have over the stinger on any of the other pipes I have tried. Very happy With the result. Now I can add some new porting and maybe a Bigger Carb to.
Hoping to have the chassis done in the next Couple weeks, we will see what happens.

Looks good how's the mini quad project coming along?
Title: Started a new project
Post by: Iceracer on December 02, 2016, 10:53:08 AM
I had a New radiator built for the 150 and need to mount it up. It needs a Engine Rebuild and Powder coat and a Brake disk guard, but is essentially done. Once I get the Hybrid frame Done I am on to a Tecate-4 frame clip and Get the Kawie engine built. Not sure on if I will stroke it or just big bore it,it be at least a 285 maybe a 318/330 Need to Get a pipe built once I get Frame Sorted out.
Title: Started a new project
Post by: Skeans1 on December 02, 2016, 11:01:12 AM
Quote from: Iceracer;71036
I had a New radiator built for the 150 and need to mount it up. It needs a Engine Rebuild and Powder coat and a Brake disk guard, but is essentially done. Once I get the Hybrid frame Done I am on to a Tecate-4 frame clip and Get the Kawie engine built. Not sure on if I will stroke it or just big bore it,it be at least a 285 maybe a 318/330 Need to Get a pipe built once I get Frame Sorted out.

You might call Pete he did a stroked one some time ago.