TRX250R.ORG
Classifieds => Wanted => Topic started by: mudbogger on March 13, 2016, 09:39:05 AM
-
Looking for a set of used engine mounts for a 89 trx 250r, with bolts and nuts would be great, but not necessary, can do any form of payment to seller. Thanks!
-
Looking for a set of used engine mounts for a 89 trx 250r, with bolts and nuts would be great, but not necessary, can do any form of payment to seller. Thanks!
Front engine mounts are interchangeable for all years trx 86-89
-
Great thanks. For some reason I am missing the front 2 mounts, but found them today on eBay.
I have a question, your gusset kit the very bottom engine mounting bolt I have does not fit since installing your new frame brackets, mine is too short, is perhaps mine the wrong bolt or does your gusset kit require new bolts?
-
Ok great thanks. I am missing the 2 fronts but found them on eBay today.
Does your gusset kit require any new bolts or nuts by chance? I have one on the lowest mount under the engine that is too short. Since everything on this ride was or is incorrect I am leaning toward a wrong length bolt but wanted to ask.
-
I have a few sets of front mounts if you want a set for the cost of shipping. Or Pumashine makes nice stainless mounts for a good price.
-
Ok great thanks. I am missing the 2 fronts but found them on eBay today.
Does your gusset kit require any new bolts or nuts by chance? I have one on the lowest mount under the engine that is too short. Since everything on this ride was or is incorrect I am leaning toward a wrong length bolt but wanted to ask.
The gusset kit has replacement lower motor mounts. The 87-89 style would have to be bent after welding to hold the motor like OEM. If you have any problems take a pic and post it up here. Were all here to help.
-
Thank you sir, can I perhaps buy the bolts and nuts from you with them if possible?
-
I had them welded in next to the original mounts, I did not understand that the old mounts are to be removed? Guess thats why my bolts do not fit lol. I will take a picture here and post it. Thanks for the help, the gusset kit really helped out big time!
-
The gusset kit has replacement lower motor mounts. The 87-89 style would have to be bent after welding to hold the motor like OEM. If you have any problems take a pic and post it up here. Were all here to help.
here is a picture of the mounts, was I supposed to remove and or bend the factory mount over?(http://forums.trx250r.org/vbulletin_imports/1710_7381_2017-04-18_8185.jpg)
-
I had them welded in next to the original mounts, I did not understand that the old mounts are to be removed? Guess thats why my bolts do not fit lol. I will take a picture here and post it. Thanks for the help, the gusset kit really helped out big time!
The replacement motor mounts are not gussets. If you put them on the outside you may be able to run a longer bolt. If welded on the inside the motor will not fit. One of the motor mount bolts are a hair longer. I have them If you need one.Part# 96400-1014000
-
Yes please I can use it. I did weld them on the outside, the engine fits in the frame right now. Can I purchase it on your site by chance? Thanks for the help!
-
Just FYI on there are pictures on the gussets installed on the website where you ordered them.
-
Just FYI on there are pictures on the gussets installed on the website where you ordered them.
thanks. i will leave as is a use a longer bolt.