TRX250R.ORG
Workshop => Suspension and Chassis => Topic started by: Morse250r on April 03, 2016, 10:31:02 AM
-
Just bought a cpl bolts to see the difference. Here are some pics of the savings. It seems best on the larger bolts. (http://forums.trx250r.org/vbulletin_imports/167_7507_2017-04-18_2861.jpg)(http://forums.trx250r.org/vbulletin_imports/167_7508_2017-04-18_3191.jpg)
-
thanks for posting
Joe
-
Nice. Ti bolts cost?
-
Ugh that's the bad part. 200 bucks for 6 bolts 20 nuts and 20 washers
-
Does anyone know what it cost today to make custom hollow swing arm bolts, hollow axles, hollow motor mount bolts for dirt bikes?
-
I've spent thousands on titanium tube, plate, bolts, nuts, washers. It makes a difference in making complete set ups light. Big bolts like swing arm etc are $200-$300 something each
-
Ti bolts are cool and all but my thing is, I'm going to be pissed if a nut comes loose and it's gone.
-
Oh and just FYI guys, the ti A arm bolts from fourwerks do not fit 86/87 frames. They are too short. I bought some long ago man found out the hard way. Jason at Fourwerx refunded my $ no problem. But for future reference Aarm bolt lengths are different from 86/87 to 88/89.
-
Does anyone know what it cost today to make custom hollow swing arm bolts, hollow axles, hollow motor mount bolts for dirt bikes?
Jerry my 88 +5 cost me less then a grand and weighs 3.5lbs out of Ti.
-
Ti bolts are cool and all but my thing is, I'm going to be pissed if a nut comes loose and it's gone.
Use blue Loctite or nylock TI nuts
-
I was unaware of ti nylock nuts. I'd go for that. Saftey wiring would be great. No way could I drill. Ti Nuts and bolts and already drilled would cost even more.
-
Ti swing arm bolts for fourworx are 100 bucks
-
And use a good copper based lube on the thread.