TRX250R.ORG

General => Lounge => Topic started by: havinnoj on April 17, 2016, 09:13:30 PM

Title: Anyone have a CRF450 dirt bike?
Post by: havinnoj on April 17, 2016, 09:13:30 PM

Looking to use a CRF450 dirt bike rear brake master cylinder so if someone has one and can measure the distance between the center of the bolt holes, that would be much appreciated.  Thanks in advance.

Title: Anyone have a CRF450 dirt bike?
Post by: croat1 on April 18, 2016, 01:27:35 AM

[MENTION=540]JesseA420[/MENTION]

Title: Anyone have a CRF450 dirt bike?
Post by: JesseA420 on April 18, 2016, 06:59:40 AM

crf master bolt spacing is 49mm :)

Title: Anyone have a CRF450 dirt bike?
Post by: havinnoj on April 18, 2016, 01:44:00 PM

Quote from: JesseA420;66690

crf master bolt spacing is 49mm :)

Thank you sir!  I'm considering (what I assume to be a late 80's - early 90's cr250 master cylinder) that is on an aftermarket frame.  It measured about 50mm so I assume the crf450 will fit.

Title: Anyone have a CRF450 dirt bike?
Post by: JesseA420 on April 18, 2016, 03:16:11 PM

wallow out the holes a smidge and it should bolt right up!