TRX250R.ORG
Classifieds => Wanted => Topic started by: mudbogger on April 24, 2016, 08:31:04 PM
-
WTB 89 stock rear bump stop-I am looking for the stock bump stop that slides on the shock shaft to prevent the shock from total compression. My shock is missing it completely.
-
WTB 89 stock rear shock specific item-I am looking for the stock rubber triangle looking bushing that slides on the shock shaft to prevent the shock from total compression. My shock is missing it completely.
The only way to replace the bump stop is to disassemble the shock & at that point you might as well rebuild it. There's lots of places to get rebuild kits if you want to do the work yourself.
-
Yes I have it dis assembled currently and are rebuilding it. Do the rebuild kits come with a new bump stop? I have already replaced the inner seal with an All Balls one, have the nitrogen kit for refilling, just need the stop, is there a seller here we use for them by chance?
-
get a hold of race tech. they have what you need. look near the bottom of the page on the right
http://www.racetech.com/page/id/71
-
Yes I have it dis assembled currently and are rebuilding it. Do the rebuild kits come with a new bump stop? I have already replaced the inner seal with an All Balls one, have the nitrogen kit for refilling, just need the stop, is there a seller here we use for them by chance?
Sorry I misread your previous post & thought you were wanting to replace the bump stop only without taking the shock apart.
-
Here you go http://www.schmidtyracing.com/mobile/Product.aspx?ProductCode=ATV-BOB-HON-250
And they're a site sponsor too
-
Thanks forbthe links wil purchase off the site vendor.
-
Purchase from schmidty, good deal, was my pleasure.