TRX250R.ORG
Workshop => Suspension and Chassis => Topic started by: TonyD on May 10, 2016, 10:38:13 AM
-
Hi guys,
Hoping someone can help ID my swingarm and front A-arms that came on my 88 250r. I've started trying to sandblast the rear swingarm (was silver vein powdercoat). I think it might be a Laegars?
(http://forums.trx250r.org/vbulletin_imports/1348_7724_2017-04-18_5039.jpg)(http://forums.trx250r.org/vbulletin_imports/1348_7725_2017-04-18_7182.jpg)
And here are the control arms. I was told they are +2, and assume standard travel. Both upper and lower tube OD measures Ø1.0"
(http://forums.trx250r.org/vbulletin_imports/1348_7726_2017-04-18_9660.jpg)(http://forums.trx250r.org/vbulletin_imports/1348_7736_2017-04-18_9027.jpg)(http://forums.trx250r.org/vbulletin_imports/1348_7727_2017-04-18_9062.jpg)
Had trouble getting a good eye to eye measurement so pushed them up against the wall (ie: subtract ~1/2" from OD to center of inner mount?)
(http://forums.trx250r.org/vbulletin_imports/1348_7728_2017-04-18_8687.jpg)
These are the stock arms that came with (I believe) for comparison:
(http://forums.trx250r.org/vbulletin_imports/1348_7732_2017-04-18_5125.jpg)
I'm replacing the stock shocks, and repowdercoating and want to make sure the shocks/geometry are spec'd out right!
Thanks is advance!:star:
-
The ball joints look like moog since they have the grease fitting. Not sure on the a arms
-
The ball joints look like moog since they have the grease fitting. Not sure on the a arms
they look like LSR a arms to the upper arms look just like my uppers do the lowers are a little different
-
Leager swing arm . https://www.google.com/search?q=trx250r+swingarm&client=ms-android-sprint-us&hl=en-US&prmd=sivn&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiwrqfi_NDMAhVBqh4KHRxGCwoQ_AUICCgC&biw=360&bih=615#imgrc=-6OOyDDMjhvKvM%3A
-
Thanks guys!