TRX250R.ORG

Workshop => Engine and Bottom End => Topic started by: bcm on July 15, 2016, 01:04:19 AM

Title: Front sprocket
Post by: bcm on July 15, 2016, 01:04:19 AM

(http://forums.trx250r.org/vbulletin_imports/1813_8020_2017-04-18_3052.jpg)(http://forums.trx250r.org/vbulletin_imports/1813_8021_2017-04-18_3481.jpg)I was just changing out my front sprocket from a 13 to a 14 and now it looks like the chain is really close to my ESR case saver, the case saver does look like it has a chain roller down the middle does this look ok doesn't seam as I have any drag. Thanks for any help, just trying to get the 250r ready for pismo

Title: Front sprocket
Post by: Rupp250 on July 15, 2016, 02:44:53 AM

Looks good to me. As long as it is not hitting or dragging your good to go.

Title: Front sprocket
Post by: bcm on July 15, 2016, 07:30:02 AM

It's touches the middle section of the case saver to the middle section of the chain, the case saver looks like it has a raised ridge in the middle for the chain though, if that makes sense

Title: Front sprocket
Post by: dem3500 on July 15, 2016, 09:24:51 AM

personally i wouldnt worry about it. if its only rubbing slightly it will clearance itself.

Title: Front sprocket
Post by: bcm on July 15, 2016, 09:42:06 AM

Ok thanks