TRX250R.ORG

Classifieds => Wanted => Topic started by: broken1 on October 10, 2016, 06:12:56 PM

Title: 88-89 seat foam
Post by: broken1 on October 10, 2016, 06:12:56 PM

Looking for an 88-89 oem seat foam or aftermarket foam thats the exact same height as 88-89 oem. Or if someone's got a complete 88-89 seat with trashed pan & or trashed cover that's fine too as long as the foam's good. Thanks.

Title: 88-89 seat foam
Post by: thesmith87250r on October 10, 2016, 08:01:41 PM

Kevin i have a foam.  Pm sent

Title: Found
Post by: broken1 on October 15, 2016, 03:27:32 PM

Thanks Rich

Title: 88-89 seat foam
Post by: Hawaiiysr on October 17, 2016, 03:08:34 AM

which years is softer?

Title: 88-89 seat foam
Post by: thesmith87250r on October 17, 2016, 10:12:55 AM

88/89

Title: 88-89 seat foam
Post by: Langbolt on October 19, 2016, 07:52:20 AM

http://ceetracing.com/en/honda/26-honda-quad-atv-.html

They list 86-89....so it must be the same density....but is it soft or firm ?

:)

Title: 88-89 seat foam
Post by: broken1 on October 19, 2016, 01:03:12 PM

Quote from: Langbolt;70261

http://ceetracing.com/en/honda/26-honda-quad-atv-.html

They list 86-89....so it must be the same density....but is it soft or firm ?

:)

I recently sold an fq005 foam because it was too tall to work with my OEM 89 seat cover. I always heard that 88-89 OEM foams were about 1" taller than 86-87 OEM foams but there more like 1/2-3/4" taller. The fq005 was about 1.125" taller than my 86 foams & it was even taller through the middle so the 88-89 OEM cover's won't fit them at all without heat & over stretching them.... As far as OEM foams go the 88-89 are softer than the 86-87 foams.