TRX250R.ORG
General => Lounge => Topic started by: DOUGLAS on December 10, 2017, 06:30:53 AM
-
what should I be running for gearing and chain ? here is my set up
engine led 363 big bore pipe
38 carb
fuel C 12
tires 20-10-9
woods riding
stock length swing arm
ride woods
i'm mostly in 2 nd through 5 th
we have a few area's we will touch 6 th
-
steel sprockets and a DID or RK chain. the X ring chains. I don't have a big bore so I can't help with gearing. @Tbone07 what do you run?
Joe
-
Your running 20" tires so your probably fine on stock gearing.
DID all the way. I ran a cheapy chain on the banshee a non o-ring and it rusted up within one ride and it was popping and making all kinds of loud noises. I switched to a DID and have zero complaints.
-
I run 13/38 or 14/38 in the woods with my LED 350. I can confirm that when I get home from work
-
thank you Tbone7