TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: havinnoj on March 13, 2018, 04:55:37 PM

Title: Laeger's Pro-Trax Shock Bolt & Nut
Post by: havinnoj on March 13, 2018, 04:55:37 PM

All, the lower shock mount on the Pro-Trax (and assuming LT Laeger) uses a smaller head for the bolt and nut so theres room for the socket.  Anybody know what these P/N's are?

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: croat1 on March 13, 2018, 08:59:58 PM

Ryan, I believe they use a socket head cap screw. I'll check my notes

Joe

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: matt250r21 on March 13, 2018, 10:05:03 PM

On mine I think I used a M10 x 65 1.25 pitch allen bolt and a regular 10mm flange nut with 14mm hex head on the nut. Not sure if 65mm is the right length I cant remember for sure.

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: The norm on March 13, 2018, 10:51:29 PM

I don't have a protrax, but I do know you can get mini head jis flange bolts and nuts at ace hardware and wilco farm store.

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: jcs003 on March 14, 2018, 04:23:37 AM

I was able to use titanium hex head screws but, i needed a thin wall socket to tighten it.

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: havinnoj on March 14, 2018, 12:45:52 PM

Thanks all - a few different options but really looking for the actual honda p/n's - @witz gave me these 10 years ago and thought I had them tucked away but cannot find them. 

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: jcs003 on March 14, 2018, 01:55:55 PM

@Langbolt

he might have the info

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: bnau267 on March 18, 2018, 09:46:15 PM

Pretty sure I use 300ex a-arm bolt Part# 90183-HC0-770. 
I think I grind the flange down just a little.  It’s been a while.

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: bnau267 on March 18, 2018, 09:49:47 PM

300ex a-arm bolt

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: havinnoj on March 19, 2018, 02:12:47 AM

Quote from: bnau267 on March 18, 2018, 09:46:15 PM

Pretty sure I use 300ex a-arm bolt Part# 90183-HC0-770. 
I think I grind the flange down just a little.  It’s been a while.

Thanks Bob.  300ex nut too I assume?

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: Langbolt on March 22, 2018, 08:14:09 PM

Quote from: jcs003 on March 14, 2018, 01:55:55 PM

@Langbolt

he might have the info

I do! TRX450 rear shock bolt.....the flange is the perfect size....fit's like OEM

BOLT, SPECIAL FLANGE (10X58)
Part# 90153-965-010

:)

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: havinnoj on March 23, 2018, 12:09:57 PM

Quote from: Langbolt on March 22, 2018, 08:14:09 PM

Quote from: jcs003 on March 14, 2018, 01:55:55 PM

@Langbolt

he might have the info

I do! TRX450 rear shock bolt.....the flange is the perfect size....fit's like OEM

BOLT, SPECIAL FLANGE (10X58)
Part# 90153-965-010

:)

Thank you sir!  @Langbolt - does the matching nut fit as well?

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: Langbolt on March 23, 2018, 01:16:55 PM

Yes! The matching nut works as well.....Part# 90305-HC0-770

:)

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: havinnoj on March 23, 2018, 07:16:35 PM

Quote from: Langbolt on March 23, 2018, 01:16:55 PM

Yes! The matching nut works as well.....Part# 90305-HC0-770

:)

Thank you sir!

Title: Re: Laeger's Pro-Trax Shock Bolt & Nut
Post by: bnau267 on March 24, 2018, 07:33:56 PM

i'm gonna have to try the 450 bolt someday.