TRX250R.ORG
General => Lounge => Topic started by: havinnoj on September 04, 2018, 09:34:41 PM
-
Someone inquired about site stickers. Who's interested? We made some up a while back but want to get member feedback on size and type they'd prefer.
-
I would love to have a large sticker for the rear of my toy hauler
-
I wouldn't mind a large one. But would like see smaller ones also
-
I want a big one for my trailer and some small ones need to represent here in Nevada
-
In. Just let me know when and where to send payment.
-
Toss out approx sizes you guys want..
-
About 6 to 8 inches long for the little ones I think
-
6-8 inch sticker sounds good to me. I would like 2 to 4, pending any overage after everyone gets one.
-
You know I'm in. A decent size 8in for the toolbox would be sweet/ Maybe 4-6in ones for all over the quad?
-
Can someone send me a pic of the old stickers? I have magnets but not stickers on hand.
-
Next question is shape and type?
Do we want die-cut or full background (i.e. rectangle or oval sticker)?
-
Here's an example of die cut - the white area is obviously the sticker. OR we could do that same logo in an oval or rectangle
-
Here's an example of a rectangle
-
Example of an oval (playing with some additional "visit us at" text)
-
I'm digging that die cut. The oval one is pretty cool as well
-
Here's an example of die cut - the white area is obviously the sticker. OR we could do that same logo in an oval or rectangle
I like this style
-
A big oval one for the back of my toy hauler would be sick
-
I’ve even looked into a 3’ x 5’ flag for my trailer but there over a $100 to have just one made
-
Here's an example of die cut - the white area is obviously the sticker. OR we could do that same logo in an oval or rectangle
I like this one. Is there any way we can replace the white background with clear?
-
I like this one. Is there any way we can replace the white background with clear?
Not sure. I'll look.
-
I can help out with smaller ones. Last year I gave some of the guys. Jeremy, Loren, Kevin. I was trying to get some cut before I left for our last meeting so I could hand them out. I already have the file made. It's almost 1am here. I'll get some pictures up in the morning so you all can see what I can make.
-
(http://thumbs2.imagebam.com/08/a3/8f/6a0df7967856734.jpg) (http://www.imagebam.com/image/6a0df7967856734)
vVvVvV this is the vinyl i use vVvVv
https://www.amazon.com/ORACAL-Glossy-Permanent-Vinyl-Inch/dp/B01N42YR3P/ref=sr_1_5?ie=UTF8&qid=1536341626&sr=8-5&keywords=vinyl+sheets
its pretty thin stuff at 2.5 mils. its good for window decals. im limited to 12" x whatever the length of the roll is. i have yet to make something larger then 12"x12" im still learning.
i might be shoot myself in the foot here but im willing to do it for my homies. the vinyl is cheap enough but you also need transfer tape so pretty much double up the price of a single roll. its my time that is most consumed. once i sit down to make them i can pump them out easy.
if you guys could help me out with shipping ill be happy to send them out. i dont image it would be more then a couple bucks. if you guys want something custom i can do that too. pm me a picture or a specific font you want and ill see what i can do. i only ask that you be patient. i have a roll of white, red, and, black. and i have a bunch of odd colors that are 12"x12" for now im going to limit this one color on a decal.
let me know your thoughts. pm me if you have a personal idea.
-
Red outline style looks real good.
-
(http://thumbs2.imagebam.com/2a/98/e6/5e03d8968203944.jpg) (http://www.imagebam.com/image/5e03d8968203944)
-
Hi guys - for the die cut stickers I posted earlier, what size would you like?
Between 5-8 inches is probably the most used size and can keep them to $2/each final cost I believe.
I can do a 12 inch diecut sticker for roughly $3-5 each depending on quantity ordered.
Oval ones are still being worked up with a potential new design.
Josh, your sticker looked good, what are you doing on that front?
-
The small size works for me. Don't mind throwing some extra money for the trouble, either.
-
The small size works for me. Don't mind throwing some extra money for the trouble, either.
Agreed. I've ordered up a couple die cuts. Should be here next week. If that looks good, I'll confirm sizing, bulk order, then ship to you guys when they come in.
-
The small size works for me. Don't mind throwing some extra money for the trouble, either.
Agreed. I've ordered up a couple die cuts. Should be here next week. If that looks good, I'll confirm sizing, bulk order, then ship to you guys when they come in.
Sounds good thanks working on this oj
-
I would like to get both sizes if you end up ordering both
-
I would like to get both sizes if you end up ordering both
Ok. I'm planning to do the smaller ones first.
For those that are interested in LARGER stickers, please comment with sizes and quantity you're looking for.
1. Loren
2.
-
Hi guys - for the die cut stickers I posted earlier, what size would you like?
Between 5-8 inches is probably the most used size and can keep them to $2/each final cost I believe.
I can do a 12 inch diecut sticker for roughly $3-5 each depending on quantity ordered.
Oval ones are still being worked up with a potential new design.
Josh, your sticker looked good, what are you doing on that front?
Sorry Ryan I miss your question. I just figure I'll make them for fun and hand them out.
-
Hi guys - for the die cut stickers I posted earlier, what size would you like?
Between 5-8 inches is probably the most used size and can keep them to $2/each final cost I believe.
I can do a 12 inch diecut sticker for roughly $3-5 each depending on quantity ordered.
Oval ones are still being worked up with a potential new design.
Josh, your sticker looked good, what are you doing on that front?
Sorry Ryan I miss your question. I just figure I'll make them for fun and hand them out.
Ok sweet thanks Josh!
-
Guys - I'm having the 7" proofs made up - should be here Monday to review. Besides much larger ones for say Toyhaulers, your garage, etc. is 7" a good all around size? I'm wondering if 4-5" might be the better all around option? Thoughts?
-
7" will work for me. lol
-
I think 7 will be good
-
7" is perfect!
-
Alright guys, got the first batch of test stickers back. I want to tweak a couple things so placed another test order. Here are the first batch:
-
Awesome!
-
Looking good Ryan
-
What are the chances of getting shirts and hoodies made also
-
What are the chances of getting shirts and hoodies made also
Will ping @croat1 on it.
-
please make a for sale thread or whatever to let us know when they are ready to purchase.
Also, my 2 cents, i would like a sticker narrow enough to go across the front hood on the R.
-
please make a for sale thread or whatever to let us know when they are ready to purchase.
Also, my 2 cents, i would like a sticker narrow enough to go across the front hood on the R.
Will do. I'm making up 6" ones - that should fit across your hood.
-
Fellas want your feedback on these. Hired out some help to develop new content for stickers/logos. I like the top ones - add the ".org" to the logo to make it more prominent and replace the 2k18 with something else more relevant. But what are your thoughts?
-
Top left is sweet.
-
Looks like the background quad on the top two stickers is a banshee.
-
I'm digging the bottom two
-
Alright guys, got the first batch of test stickers back. I want to tweak a couple things so placed another test order. Here are the first batch:
I really like these. Not a huge fan of the oval stickers, maybe the top left one if anything.
What lengths are these available in again?
-
Keep the feedback coming. The "TRX250R.ORG" ones you like @Tbone07 will be available - sizes TBD. But wanted to come up with another option too.
-
Alright guys, got the first batch of test stickers back. I want to tweak a couple things so placed another test order. Here are the first batch:
Ok one thing about these.....if the "250" portion of the sticker doesn't have a white outline/border, then you won't able to see it if it's on a dark truck window (or something similar)
-
Guys need feedback. Besides possibly changing the shadow to a 250r, what else is needed? Who’s interested in these oval ones over just the “trx250r.org”?
-
quick update,
-
@havinnoj
@hawaiiysr
Ryan and Josh, do you guys have any of these stickers? If yes, what is the length? I need some 5”