TRX250R.ORG

Classifieds => Wanted => Topic started by: croat1 on February 17, 2019, 01:15:50 AM

Title: Wanted
Post by: croat1 on February 17, 2019, 01:15:50 AM

In desperate need of a NOS 88/89 right side case

88/89 foot peg mounting hardware

87-89 stock cylinder and head (NOS).

Thanks
Joe

Title: Re: Wanted
Post by: Action69 on February 17, 2019, 10:53:44 AM

What. Exactly do you need in terms of foot peg mount

 hardware.?are you looking for nos or. Usable Hardware

Title: Re: Wanted
Post by: croat1 on February 20, 2019, 12:05:38 PM

Quote from: Action69 on February 17, 2019, 10:53:44 AM

What. Exactly do you need in terms of foot peg mount

 hardware.?are you looking for nos or. Usable Hardware

Steve, I need the pins and springs. NOS would be great but nice used is ok also.

Joe

Title: Re: Wanted
Post by: Action69 on February 20, 2019, 08:00:26 PM

Ok joe I may have them I’ll check when I go to my garage..they’re not nos..

Title: Re: Wanted
Post by: meathead on February 25, 2019, 01:54:39 AM

Actually 85 to 89 right side cases are the same The whole engine is the same. The only difference is 85 & 86 are short rod engines. 87 to 89 are long  rod engines. There are slight differences in different year heads. as a matter of fact i have an extra cylinder and head

Title: Re: Wanted
Post by: The norm on February 25, 2019, 01:22:58 PM

Quote from: meathead on February 25, 2019, 01:54:39 AM

Actually 85 to 89 right side cases are the same The whole engine is the same. The only difference is 85 & 86 are short rod engines. 87 to 89 are long  rod engines. There are slight differences in different year heads. as a matter of fact i have an extra cylinder and head

Mostly true. If you look at the very front of the engine where the mounting bolt goes through the cases there is a difference in appearance.  If you mix and match cases you will notice the difference.  The earlier cases had more of the bolt exposed than the later cases. Thanks Loren

(http://thumbs2.imagebam.com/18/c3/d2/78067b1144481794.jpg) (http://www.imagebam.com/image/78067b1144481794) (http://thumbs2.imagebam.com/f6/83/e4/98653f1144481834.jpg) (http://www.imagebam.com/image/98653f1144481834)

Title: Re: Wanted
Post by: hickwheeler on February 25, 2019, 01:28:30 PM

I think you have that swapped around Loren. Early cases had less of an opening. 88-9 had the bigger opening

Title: Re: Wanted
Post by: The norm on February 25, 2019, 01:34:17 PM

Quote from: hickwheeler on February 25, 2019, 01:28:30 PM

I think you have that swapped around Loren. Early cases had less of an opening. 88-9 had the bigger opening

I do have it swapped around.  Thanks Gene lol

Title: Re: Wanted
Post by: croat1 on February 25, 2019, 02:06:16 PM

Keep in mind the color difference also. The right side case I’m looking for is for a buddy that is doing a complete NOS build.

@meathead, the cylinder and head that you mentioned...new?

Joe

Title: Re: Wanted
Post by: 2Nubs on February 25, 2019, 03:17:16 PM

I was really confused how my trike cases have the V style opening lol. I had also read elsewhere that the V style was late model. Thanks for clarifying Gene.

Title: Re: Wanted
Post by: broken1 on February 25, 2019, 08:05:59 PM

There's more subtle differences between all the years than most realize.

Title: Re: Wanted
Post by: croat1 on February 25, 2019, 08:19:20 PM

Quote from: broken1 on February 25, 2019, 08:05:59 PM

There's more subtle differences between all the years than most realize.

Absolutely

Title: Re: Wanted
Post by: meathead on February 26, 2019, 12:05:25 AM

CROAT 1 No its not new, but i'm pretty sure it has a stock bore. You probably want a matched set of cases.

Title: Re: Wanted
Post by: hickwheeler on February 26, 2019, 01:14:01 AM

Honda didn't even sell them as sets

Title: Re: Wanted
Post by: meathead on February 26, 2019, 02:01:39 AM

I stand corrected. Sorry for my ignorance.

Title: Re: Wanted
Post by: hickwheeler on February 26, 2019, 02:16:45 AM

No ignorance just letting people know

Joe sorry your thread got cluttered

Title: Re: Wanted
Post by: croat1 on August 30, 2019, 12:54:35 PM

Still looking

Thanks

Joe

Title: Re: Wanted
Post by: croat1 on January 22, 2020, 02:10:13 PM

One last bump....anyone have the parts?

Thanks

Joe

Title: Re: Wanted
Post by: FerrinMotorsports on February 06, 2020, 08:14:42 PM

I probably have all the parts you need....I'll let you know what I have tomorrow...