TRX250R.ORG

Classifieds => Wanted => Topic started by: The norm on September 22, 2020, 12:50:23 AM

Title: Kick starter spindle collar
Post by: The norm on September 22, 2020, 12:50:23 AM: Good evening everyone! I am in search of the 20x27 collar for an 86 kick starter spindle shaft, part number 28283-HA2-010. I can't afford Ebay prices so be gentle lol. If I can't find a collar I suppose I will machine one out of 4140.
Loren

#9

(https://thumbs2.imagebam.com/45/47/2a/56089c1354808399.jpg) (http://www.imagebam.com/image/56089c1354808399)
Title: Re: Kick starter spindle collar
Post by: croat1 on September 22, 2020, 12:45:10 PM: Loren, I just checked to see if I had a spare....no spares. I can get one made if you don’t have the time.

Joe
Title: Re: Kick starter spindle collar
Post by: The norm on September 22, 2020, 03:49:12 PM: I think I have the time as I am stuck in the shop at work until I get off light duty. The shop I am in has a pretty fantastic machine shop area!!! I just worry about the dimensions. Is it really 20x27? I will machine one and see lol
Title: Re: Kick starter spindle collar
Post by: broken1 on September 22, 2020, 08:47:46 PM: I txt you the dimensions awhile ago, I take it you deleted that one?lo!
Title: Re: Kick starter spindle collar
Post by: The norm on September 22, 2020, 09:21:29 PM: Quote from: broken1 on September 22, 2020, 08:47:46 PM
I txt you the dimensions awhile ago, I take it you deleted that one?lo!

I guess I forgot lol. I will scan through my texts. Thanks Kevin
Title: Re: Kick starter spindle collar
Post by: broken1 on September 23, 2020, 12:21:06 AM: I'll measure the one from the engine I'm rebuilding & txt it to you again.
Title: Re: Kick starter spindle collar
Post by: Pumashine on September 24, 2020, 09:17:47 PM: 1.065" OD or 27mm .803 ID and 1.178" long, about 30mm long. I think Carlos makes them.
Title: Re: Kick starter spindle collar
Post by: Hawaiiysr on September 27, 2020, 03:15:47 AM: I'll push start my R before I ever purchase from him
Title: Re: Kick starter spindle collar
Post by: The norm on September 27, 2020, 03:31:22 PM: Quote from: Hawaiiysr on September 27, 2020, 03:15:47 AM
I'll push start my R before I ever purchase from him

Lmao me too!
Luckily I have a lathe or two at my disposal and a supply of 4140 ready for me to transform in to a collar.
Title: Re: Kick starter spindle collar
Post by: 2ndmoto on September 27, 2020, 05:54:30 PM: Make a few and help the community out
Title: Re: Kick starter spindle collar
Post by: The norm on October 07, 2020, 08:17:51 PM: Problem solved...... 4140 tgp shaft.

(https://thumbs2.imagebam.com/c9/d8/fd/c4eb681355953431.jpg) (http://www.imagebam.com/image/c4eb681355953431)
Title: Re: Kick starter spindle collar
Post by: matt250r21 on October 07, 2020, 08:28:18 PM: nice job
Title: Re: Kick starter spindle collar
Post by: 2ndmoto on October 08, 2020, 12:01:55 AM: Smoking hotness
Title: Re: Kick starter spindle collar
Post by: Hawaiiysr on October 08, 2020, 05:53:26 PM: right on
Title: Re: Kick starter spindle collar
Post by: desertR on October 08, 2020, 07:03:17 PM: Why 4140 ? If you have it laying around, great, but I probably would have gone with aluminum. The kick starter is not a high load area. I also have lots of aluminum laying around.
desertR
Title: Re: Kick starter spindle collar
Post by: Hawaiiysr on October 08, 2020, 08:33:15 PM: because it free from work lol
Title: Re: Kick starter spindle collar
Post by: The norm on October 08, 2020, 08:57:26 PM: I used 4140 because it will never wear out. Also Honda used a hardened steel collar precision ground. Another reason I chose 4140 over aluminum was because of the catastrophic failure of my aluminum clutch basket. The flying aluminum pieces did damage to my clutch cover, clutch frictions, and scratched up the clutch area of the right case. The clutch cover ended up getting cracked in the kick starter spindle bore.
Title: Re: Kick starter spindle collar
Post by: Braaaping247 on January 25, 2021, 01:22:39 AM: Any forsale for the 85 kicker but with the 86 sleeve.
Title: Re: Kick starter spindle collar
Post by: The norm on January 25, 2021, 08:38:08 AM: I can probably hook you up. I will pm you