TRX250R.ORG

Workshop => Suspension and Chassis => Topic started by: Banshee330 on May 03, 2021, 11:37:37 AM

Title: Swing arm bearings
Post by: Banshee330 on May 03, 2021, 11:37:37 AM

Anybody know the actual toyo number on the 86/87 swing arm bearing?

Title: Re: Swing arm bearings
Post by: croat1 on May 03, 2021, 10:07:55 PM

The bearing dimensions are 20x26x30.  I just usually type in the bearing dimensions and bearing type to get the part number or at least the bearing manufactures catalog page.  In this case it’s a drawn cup needle bearing.  I’ll see what I come up with.

Joe

Title: Re: Swing arm bearings
Post by: Banshee330 on May 05, 2021, 11:36:48 AM

Thanks, trying to come up with some dimensions to make a removal tool.

Title: Re: Swing arm bearings
Post by: Banshee330 on May 05, 2021, 07:18:07 PM

Started to make something, then I didn’t have time. Came home and started looking, hmm 2 stiff drinks later I got one out with 2 sockets a touch of heat and a piece of all thread!

Title: Re: Swing arm bearings
Post by: Banshee330 on May 06, 2021, 06:32:13 AM

Here’s the nomenclature on the swing arm bearing.

Title: Re: Swing arm bearings
Post by: atvmxr on May 06, 2021, 01:17:30 PM

for 86/87, doesnt someone make a hard poly version?

Title: Re: Swing arm bearings
Post by: croat1 on May 06, 2021, 02:11:14 PM

Quote from: atvmxr on May 06, 2021, 01:17:30 PM

for 86/87, doesnt someone make a hard poly version?

Helm Enterprises:
https://www.atvbushings.com/

I’ve also seen a few others on the FB pages make some over the years,

Joe

Title: Re: Swing arm bearings
Post by: Banshee330 on May 07, 2021, 06:42:09 AM

Great information. I already bought a rebuild kit with needle bearings in it. I need to speak up for better advice before buying stuff. I got so much I want to do to this quad. Powder coat (no idea ) need a exhaust clamp for a PT and fat boy, when you buy aftermarket a -arms do they come with bushings? Looking for rebuild kits for master cylinder and all 3 calibers. Got a long way to go. Slowly but surely new parts are starting to pile up.

Title: Re: Swing arm bearings
Post by: broken1 on May 07, 2021, 11:44:19 AM

Aftermarket a-arms will be ready to bolt on if you buy them new... I've rebuilt 2 complete sets of brakes using Shindy rebuild kits & have no complaints, there high quality parts. If you need a rear mc push-rod Suzuki part number 69670-00A00.

Title: Re: Swing arm bearings
Post by: Banshee330 on May 28, 2021, 07:28:27 PM

Any idea where this goes? I can’t find a home for it. It wasn’t on or bolted to the quad when I got it.

Title: Re: Swing arm bearings
Post by: croat1 on May 28, 2021, 07:57:42 PM

Lower chain slider.  Bolts to the frame.

Circled area

Title: Re: Swing arm bearings
Post by: Banshee330 on May 28, 2021, 11:20:37 PM

Thanks Joe!