TRX250R.ORG
Workshop => Engine and Bottom End => Topic started by: All250R on August 26, 2023, 01:35:16 PM
-
Without checking the number printed on the OE bearing, a search in a few places on the forums revealed the part number to be 16007. The OE spec though appears to be NTN TM16007.
The two bearings are dimensionally the same but the load spec is different, the TM bearing having a higher load rating.
https://bearingfinder.ntnamericas.com/keyword/deep-groove-ball-bearings?key=all&keyword=16007&SchType=2
https://www.forums.trx250r.org/index.php/topic,8922.msg80494.html#msg80494
If you've had success running a standard 16007, that might be useful to have documented.
In the meantime, if you'd like the 16007 bearing I ordered, I'll send it to you for $20 shipped small flat rate usps just to cover cost and time.
Btw, counterfeit bearings are a problem. appllied.com is an "approved" dealer for NTN
$49.23 https://www.applied.com/c-brands/c-skf-corp/c-skf/16007/Cylindrical-Bore-Deep-Groove-Ball-Bearing/p/100756217
$52.82 https://www.applied.com/c-brands/c-ntn-bearing-corp-/tm-16007m3/Single-Row-Radial-Ball-Bearing---Open-Type/p/101814437
-
Good info. Thanks for sharing!
-
just to un-bury it into another post, if anyone is interested in the standard 16007 bearing I have, let me know. $20 shipped.
-
Here's the Specs if anyone wants to see the actual numbers ;) as well as the other alternatives with a different clearance (C3 & C4)
https://bearingfinder.ntnamericas.com/keyword/deep-groove-ball-bearings/single-row-radial-ball-bearings?key=all&keyword=16007&SchType=2
:)